Quote Originally Posted by MikeG View Post
Its a 31qt sterilite i got from walmart. The secures to the tub with these latches you slide inward on the top of the lid.

I was messing with the power only because the manual said if your temps fluctuate you can switch it to lower or higher output to get it right.

And here are two quick pics i took with my phone..still haven'tf dug out the dig cam yet.

That is the only non covered part-



Flexwatt is taped down to insulation..(should i put it back on the bottom of tub?)



Flexwatt is currently at 100F, hotside is at 86 and sloowwwwlllly rising, cool side is 74. I just put the tub back in there about 10min ago so ill post back the temps when they steady off.

Thanks for the reply

Mike~
there is too many openings with the refletix which is why you having such a temp issue.if you taped the seams for the top, back, and 2 sides of the tub it would hold the heat in better.