Quote Originally Posted by nixer View Post
proportional or on/off either pretty much dont matter for the snake.

do you have a camera id like to better see how you have it.

also what kinda tub is it some don't have tight fitting lids

also you shouldn't be changing the power output you should only be changing the temp setting
Its a 31qt sterilite i got from walmart. The secures to the tub with these latches you slide inward on the top of the lid.

I was messing with the power only because the manual said if your temps fluctuate you can switch it to lower or higher output to get it right.

And here are two quick pics i took with my phone..still haven'tf dug out the dig cam yet.

That is the only non covered part-



Flexwatt is taped down to insulation..(should i put it back on the bottom of tub?)



Flexwatt is currently at 100F, hotside is at 86 and sloowwwwlllly rising, cool side is 74. I just put the tub back in there about 10min ago so ill post back the temps when they steady off.

Thanks for the reply

Mike~