» Site Navigation
1 members and 659 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,905
Threads: 249,105
Posts: 2,572,114
Top Poster: JLC (31,651)
|
-
Re: night time heating
 Originally Posted by zombie&lemons
so what your saying is go a little cooler on my cool side at night or no do i just leave it alone
Can't you just keep them the same during the day and at night?
-
-
Banned
Re: night time heating
well its kinda hard here cause day time temps might reach 70's right now and at night drop to 40's plus im running night and day time lights im trying to keep it close but its hard cause house time change too
-
-
Re: night time heating
 Originally Posted by zombie&lemons
well its kinda hard here cause day time temps might reach 70's right now and at night drop to 40's plus im running night and day time lights im trying to keep it close but its hard cause house time change too
Oh. Well just try to keep a hot spot of 90-94 and ambients at 80-85 and thats fine. Try not to make it hotter than 95 though. As for the ambient, don't let it drop below 75. There is a little wiggle room so you should be fine.
-
-
Banned
Re: night time heating
thats about where i got the night time temp at on the cool side is 78-80. hot side 80-82 with a baskin spot around 88-90
day well that a different storry im my own thermostat till i get mine in
and once i do where should i place the probe in the baskin spot or set it for ambient temp
-
-
Re: night time heating
 Originally Posted by zombie&lemons
thats about where i got the night time temp at on the cool side is 78-80. hot side 80-82 with a baskin spot around 88-90
day well that a different storry im my own thermostat till i get mine in
and once i do where should i place the probe in the baskin spot or set it for ambient temp
Since you are using lamps, its a bit debatable. I would personally put the probe on top of the substrate on the hot side (you can call it a basking spot, but they don't really bask). Then you will set the thermostat at 90-94 to get your hot-spot temp. This is the most important temp because it helps them to properly digest their food. While the others are also important, they can be more forgiving.
-
The Following User Says Thank You to Kaorte For This Useful Post:
zombie&lemons (02-20-2009)
-
Banned
Re: night time heating
 Originally Posted by Kaorte
Since you are using lamps, its a bit debatable. I would personally put the probe on top of the substrate on the hot side (you can call it a basking spot, but they don't really bask). Then you will set the thermostat at 90-94 to get your hot-spot temp. This is the most important temp because it helps them to properly digest their food. While the others are also important, they can be more forgiving.
just what i needed to know thank you
-
-
Banned
Re: night time heating
the lamps for the cages below heat up the under side of the cage above to about 95
did that sound right or did i leave out words or add to many words
im bad with english
math is my fav
-
-
Re: night time heating
 Originally Posted by zombie&lemons
the lamps for the cages below heat up the under side of the cage above to about 95
did that sound right or did i leave out words or add to many words
im bad with english
math is my fav
How are you measuring the temps?
-
-
Banned
Re: night time heating
infrared gun digital gauges anything and everything for now untill i get my tstat in
-
-
Registered User
Re: night time heating
Honestly at night I don't even keep a warm side. I just let the ambient temps run for the night time. Been doing it for five years like that and never had a problem.
Bloodsong
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|