Vote for BP.Net for the 2013 Forum of the Year! Click here for more info.

» Site Navigation

» Home
 > FAQ

» Online Users: 560

1 members and 559 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.

» Today's Birthdays

None

» Stats

Members: 75,909
Threads: 249,113
Posts: 2,572,164
Top Poster: JLC (31,651)
Welcome to our newest member, KoreyBuchanan
Results 1 to 10 of 18

Threaded View

  1. #10
    BPnet Veteran Jsh's Avatar
    Join Date
    01-14-2009
    Location
    So. Indiana
    Posts
    619
    Thanks
    278
    Thanked 149 Times in 143 Posts
    Images: 28

    Re: Saving Electricity

    Quote Originally Posted by Gloryhound View Post
    If you have 2’ of 4” flex watt that is rated for 8 Watts per foot that means at most it can use 16 W per hour (Yes, Watts as far as power consumption are measured in Watt/Hours)

    At 100% capacity all the time 16 W X 24 Hours = 384 Watt hours per day

    Lets say that average month is 30 days. 384 Watt hours per day X 30 Days = 11520 Watt hours per month.

    You pay by the Kilowatt hours on your electric bill so we have to dive the watt hours by 1000 to determine the number of kW hours this heating element is using. 11520 / 1000 = 11.52 kW hours per month.

    High end charges for electricity is $0.12 per kW so we multiply 11.52 kW Hours by the $0.12 and arrive with a monthly cost to run this heating element of $1.39. We rounded up just to say the power company is really greedy.

    Now my Herpstat Pro actually shows the amount of full power it is putting out in a percentage form from 0% to 100%. The highest I ever see mine get while powering (10) 1 foot sections of 11” flex watt that uses 12 Watts per foot is 30%. Lets use this as a rough guess of where yours will run. 30% changed to a numeric number for calculation is 0.3. For a short cut here lets just multiply the final cost by the actual percent it is actually using, so $1.39 X 0.3 = $0.42 per month.

    In a year you will pay that times 12 for a whopping total of $5.04 for heating your snake for the whole year.

    Now the big question is the power savings between the rheostat and a proportional T-stat. Can’t say without knowing what proportional T-stat we are comparing with what rheostat and having the specs from each, but I can say a proportional T-stat is a lot safer for your herp than a rheostat.

    In general this is not an area you are going to save money on power use. You are better off making sure the computer is off when not in use, lights are off when not needed, swapping from incandescent bulbs to the spiral types on lights that get turned on and stay on for 10 minutes or more at a time, (Start up power on those spiral bulbs are huge, but they don’t advertise that.), Turning your AC up 1 degree in the summer and your heat down 1 degree in the winter even if you use gas heat as the blower motors in forced air systems use lots of power...

    I think you get the point.
    Thanks for the info! I have two belly heat RBI racks and herpstat II coming and I was worried about how much the bill will go up. --Josh
    Last edited by Jsh; 02-13-2009 at 04:35 PM. Reason: Typo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.1