Herpstat only has three outlets!

[SGExotics]

Yea just use extension cords, this is one of the reasons I always tell people to just zigzag heat rope or flexwatt it's just more practical unless your going to do different temps on different shelves. The extension cords won't matter as long as you don't exceed the max wattage of the Herpstat, I think it's 500w so you should be good.

The wattage is the important thing. Keep track of the totals for each strip of flexwatt and make sure you're nowhere near 500w and you're good.

Instead of extension cords, though, I would use the outlet extenders. You know, the little 'boxes' with three outlets on one plug. They're more direct to the original power source. That's what I use on my Herpstat with 5, soon to be 8, UTH pads plugged into it.

Thanks for the replies guys,
And yea, each strip is 1 foot each, and the wattage is 20 watts per foot. So all the heat tape together comes out to 120 watts! So im definately good as far as wattage goes.

Again, thanks for the replies!
-Brandon