Quote Originally Posted by claireree View Post
well we have taken them out tonight and given the viv a damn good clean and and the good news is the boy has eaten as well, is the girl like corns do they have a post shed before they will feed as she wasnt interested.

We did notice when we got them out they are both rather flabby is this normal or are they underweight, I have ordered a book so hopefully when that comes I will stop with all the questions.

Anyway tom we are building them a new viv each with some nice hides as the one they are in you cant swing cat in it is just wide enough for when they are curled up but they touch the sides, the poor things havent been very well looked after.
Ask as many questions as you can come up with, we are here to help!! Check out our care sheets, they are a little lengthy but WELL worth the read. Here is some basic info for you which is MUCH more in depth in the care sheets.

1) To measure your humidity and temperature accurately - Use DIGITAL gauges (stick on gauges are NOT reliable, and a waste of money unfortunately) The most cost friendly device you can purchase is an accurite digital thermometer/hygrometer from wal-mart for $12. The gauge does not have to be this brand, but something with an outdoor/indoor measurement will work because this means the device uses a probe.

2) You need a belly temperature (right on the glass under the hide on one side of the tank) measured by a probe (which comes with something like an accurite) of 90 - 93 degrees. This is where your bp will spend his time digesting and hanging out A LOT. A UTH (under tank heater) costs about $20 at a pet store but MUST have a control.

The safest and most reliable type of control is a thermostat ($70 - $300) but the minimum requirement for a control is something like a lamp dimmer (a rheostat, which is something that must be manually adjusted). Lowes sells piggyback lamp dimmers for about $10.

3) You need a hide on the cooler side of the tank with a belly temperature or ambient temperature in the low 80's. This can be achieved through a heat lamp with the correct wattage bulb, or simply a nice warm room. Keep in mind that the two hides you choose should be the same so your bp feels EQUALLY secure in BOTH hides. Your bp will choose where it feels safest, whether or not it is the correct temperature.

4) HUMIDITY = very important - just as important as temperature. 55-60% humidity is required for proper shedding. For tips on how to achieve this please see the care sheets.

5) A sturdy water dish with fresh water can be put anywhere in the tank, if placed over a UTH (under tank heater) it can help raise the humidity.

6) Substrate can be anything from newspaper or cage liners to aspen. Cedar is TOXIC. Do not use cedar. CYPRESS mulch is good - don't mix it up with cedar.

7) Security - ball pythons are shy. They hide more than 80% of the time so if your snake is hiding a lot, thats a good thing. Cover three sides of your tank with paper/aquarium background - what ever you would like to help your snake feel less exposed. Snug, identical hides are a MUST, one on the cool side one on the hot side.