DIY: Coca Cola Incubator

[West Coast Jungle]

I have a regular computer fan, I didn't know they come in different sizes

[Monty]

i would say go wit ha 110mm computer fan or a 125mm fan

[starmom]

Wow Mikkla~ that's brilliant!! I need to keep a watch for things like that since I'm hoping to have three clutches next season! Thanks and let us know how your clutches hatch out!!

[Mikkla]

Wow Mikkla~ that's brilliant!! I need to keep a watch for things like that since I'm hoping to have three clutches next season! Thanks and let us know how your clutches hatch out!!

Thanks
I'm so excited about my first breeding so you bet I will keep you updated

[ShawnT]

I have a regular computer fan, I didn't know they come in different sizes

Yes many sizes...From 25mm up to 220mm

[KMS]

go to your local pet store and get one from ESU (its uses is for saltwater aqu) but it comes already with the cord attached,No wiring.
Kevin Stoltz
www.kmsreptiles.com

[Mikkla]

Okey, so now it's done. I made a few changes. I changed to backheat instead of on the sides and I first tought that It would be enough with one fan, but I had to get two in the end

[dragondavy]

These are very cool!

I must make one!

[dragondavy]

Okey, so now it's done. I made a few changes. I changed to backheat instead of on the sides and I first tought that It would be enough with one fan, but I had to get two in the end

How did you put the fans together so you can plug them in the wall? I see the AC adapter, but do they sell something just for the fans?
I had an old computer and I took the fans out from it to use when I get a Coca cola frig.

But these all look so good and better then dropping mad cash for a pro lab incubator.

Thanks for the help!!

[Mikkla]

How did you put the fans together so you can plug them in the wall? I see the AC adapter, but do they sell something just for the fans?
I had an old computer and I took the fans out from it to use when I get a Coca cola frig.

But these all look so good and better then dropping mad cash for a pro lab incubator.

Thanks for the help!!

I got both the fans and the AC adapter in the same store. I just told the clerk what I was doing and that I needed to a fan to plug in to the wall. They weren't made for each other so I cut of the yellow wire and striped the other two and connected them to the adapter with soldering and I used shrink tubes instead of electric tejp





I also drilled holes in the bottom of the incubator for all the wires, so the adapter is on the back...

Glad you liked it