New to snakes.. need help

[Amanda1987]

where is the thermostat probe for the warm side located? what is the cool side thermostat regulating, a light?

The probe is under the substrate under the hide. The cool side is regulating another under tank heating pad. It is programmed to 79. My house gets really cold at night. So I thought I'd give it a try with two heating pads

Sent from my SM-G920R7 using Tapatalk

[tttaylorrr]

The probe is under the substrate under the hide. The cool side is regulating another under tank heating pad. It is programmed to 79. My house gets really cold at night. So I thought I'd give it a try with two heating pads

Sent from my SM-G920R7 using Tapatalk

you need to move BOTH thermostat probes OUTSIDE of the enclosure as i have already stated in my earlier post.

[Amanda1987]

you need to move BOTH thermostat probes OUTSIDE of the enclosure as i have already stated in my earlier post.

I did. Both thermostat probes are on the outside of the tank. I left the indoor outdoor thermometer on the inside

Sent from my SM-G920R7 using Tapatalk

[tttaylorrr]

I did. Both thermostat probes are on the outside of the tank. I left the indoor outdoor thermometer on the inside

Sent from my SM-G920R7 using Tapatalk

my apologies for the misunderstanding. now you'll have to monitor the bottom of each side of the enclosure and adjust the thermostats accordingly. my warm side UTH is set at (i think) 95° to achieve a 90° hot spot at the bottom of the enclosure.

[Amanda1987]

my apologies for the misunderstanding. now you'll have to monitor the bottom of each side of the enclosure and adjust the thermostats accordingly. my warm side UTH is set at (i think) 95° to achieve a 90° hot spot at the bottom of the enclosure.

Mine is set to 90° and thermometer says it's 82 but it keeps adjusting
I'll keep an eye on it today. Thank you for your help.

Sent from my SM-G920R7 using Tapatalk

[tttaylorrr]

Mine is set to 90° and thermometer says it's 82 but it keeps adjusting
I'll keep an eye on it today. Thank you for your help.

Sent from my SM-G920R7 using Tapatalk

you'll have to let it run for an hour or so to see if they stabilize at the right temperatures. just keep an eye on it and keep dialing everything in; you'll get there.