Belly heat- FlexWatt help!!! Pleaseee

[Christiane]

So long as it's thermostat regulated it will be fine. The heat tape won't ignite anything as long as it's in a safe temp range. I had mine pressed against the cage with a sheet of plywood when I used belly heat previous with no issue.


Sent from my iPhone using Tapatalk

That's my concern as I have my thermostat set at max right now, but hopefully if I have it pressed up against it, it will allow me to lower the thermostat.

How did you secure the plywood onto the bottom of the tank safely?


Sent from my iPhone using Tapatalk

[jmcrook]

That's my concern as I have my thermostat set at max right now, but hopefully if I have it pressed up against it, it will allow me to lower the thermostat.

How did you secure the plywood onto the bottom of the tank safely?


Sent from my iPhone using Tapatalk

Plywood set on the shelf/table, cage set on top. Good old gravity works just fine.


Sent from my iPhone using Tapatalk

[BPGator]

Right around 70


Sent from my iPhone using Tapatalk

So do you have another heat source, or when you said your enclosure ambient is 80 you meant the surface temp? I think if your room is 70, your best bet is a RHP to bring your air temps up; you also won't need the flexwatt.


Sent from my iPhone using Tapatalk

[L.West]

What type of thermostat are you using??

[Christiane]

What type of thermostat are you using??

Zilla thermostat.


Sent from my iPhone using Tapatalk

[Christiane]

So do you have another heat source, or when you said your enclosure ambient is 80 you meant the surface temp? I think if your room is 70, your best bet is a RHP to bring your air temps up; you also won't need the flexwatt.


Sent from my iPhone using Tapatalk

So with the RHP I won't need the belly heat? I'm new to this so forgive me, but I thought that BPs needed more belly heat rather than air temps being higher. Just a little confused about how that works best, any advice is so helpful so thank you for responding and helping. Also - is it possible to install an RHP after already assembling the tank ?


Sent from my iPhone using Tapatalk

[Randall L Turner Jr]

Radiant heat panels work like the sun, it radiates heat into the surfaces below it. So it will provide a hot belly spot for your animal. Think about how hot the sidewalk gets during a sunny summer day.

[Christiane]

Radiant heat panels work like the sun, it radiates heat into the surfaces below it. So it will provide a hot belly spot for your animal. Think about how hot the sidewalk gets during a sunny summer day.

Well that makes plenty more sense. Guess I was thinking too far into it. I feel silly haha!

Last question, would my zilla thermostat be able to handle an rhp? I want what's best for my boy but also I've spent quite a bit recently. If it is needed for sure I will absolutely spend the money but wondering if it will do fine.


Sent from my iPhone using Tapatalk

[BPGator]

Well that makes plenty more sense. Guess I was thinking too far into it. I feel silly haha!

Last question, would my zilla thermostat be able to handle an rhp? I want what's best for my boy but also I've spent quite a bit recently. If it is needed for sure I will absolutely spend the money but wondering if it will do fine.


Sent from my iPhone using Tapatalk

Yes, the Zilla thermostat will work. Most on here, including myself, would recommend a Herpstat thermostat though. Use a temp gun to zero in on the temp with your thermostat.


Sent from my iPhone using Tapatalk

[L.West]

I would upgrade your thermostat. You can get a good thermostst from reptile basics for a reasonable price - check them out. I have many of These thermostat and they work great.

A thermostat is really the most important equipment You need