Woops guess I missed some of the thread lol. You can mount a RHP with a shelf. I talked to Ali about it and she said probably the best idea would be mount it forward of the shelf as the shelf is 8". The cage is 24" and the rhp is 12". So that should still leave 4" of free air for the shelf. Then butt it against cage side and drill a hole out the side for the wiring since I didn't want to cable clamp the wiring above the shelf and the led lighting. This was if I installed it myself. Like I said, if you have it drop shipped to AP, they can probably mount it the same way but don't need to butt it against the cage wall as they can just drill a hole through the roof and route a channel for the wiring like they do with the led lighting. That was you still have a clean flush top that you can stack cages if you want to. But like I said, talk to Ali and ask her what the best way to do it is. They have done tons of custom cages so they should have lots of good ideas.
And for sure go for the T10. The extra 3" is nice for getting into the cage and your BP will make use of it. My BP loved her shelf until I poached the cage for my retic lol. But i'll give her a T10 back when I order Rosey and Vicky their T25s and then see if Caesar needs one too.
Reply With Quote