Is an AP T8 too overkill?

[Scottywelsh]

As long as it's regulated with a thermostat you could have a 200w RHP and it would be fine as long as it's not to big.
When you have it you can try different things to check the temps. And you could make a movable divider and make it a little bit bigger rather than having it right in the middle which would move the cold side further away.

[Mizaniverse]

As long as it's regulated with a thermostat you could have a 200w RHP and it would be fine as long as it's not to big.
When you have it you can try different things to check the temps. And you could make a movable divider and make it a little bit bigger rather than having it right in the middle which would move the cold side further away.

How would you make a movable divider?

[Scottywelsh]

I'd get a piece of cardboard to use as a template. Cut the cardboard so it's a tight fit in the cage and then get a piece of plastic or wood or whatever you want to use as a divider.
Use the cardboard template to get it to the size you need.
You could use screws to hold it in place in the vivs. Or get it tight enough so that you don't need anything to hold it into place. Or make a wooden divider and then get a couple pieces of wood that are long enough to to touch the divider and the other side of the vivs at the same time making it impossible for the snake to push the divider out
There are probably hundreds of ways to do it. Just need to look at what materials you have or can get and work around that .
Good luck

[chrid16371]

How would you make a movable divider?

The divider from animal plastics is movable already so you don't have to keep the cage 50/50. You can start at 50/50 and move the divider to 60/40 then 70/30 and so on until your snake is full grown. $20 for a perfect fit movable divider isn't bad.

Sent from my SAMSUNG-SM-G890A using Tapatalk

[Scottywelsh]

I've never had a t8 because I live in the UK and no one deals with them here. I would love to have one tho !!
But in a previous post on here about the t8 they said there is a slight groove that the divider goes in and the divider is screwed in so you'd have to keep making holes if that's the case.
Although now that I think about it that might have been a different make not an AP cages.

[chrid16371]

I've never had a t8 because I live in the UK and no one deals with them here. I would love to have one tho !!
But in a previous post on here about the t8 they said there is a slight groove that the divider goes in and the divider is screwed in so you'd have to keep making holes if that's the case.
Although now that I think about it that might have been a different make not an AP cages.

They give you the option of making it permanent if you want and provide screws but you don't have to do that. You can definitely move the divider, I have a T10 but no divider personally but I have read plenty of t8 threads to know they can be moved. If you read the how to set up PVC cage AP T8 sticky the OP of the threads has dividers and states you can move it.

Sent from my SAMSUNG-SM-G890A using Tapatalk