Several husbandry questions!

[SCWood]

Check the wattage rating for each. If they are the same then you can set them up and test them to see if they'd be the same or even close. Don't run the test where your critter can access the heat though, do it on an empty tank.

Ahhh, gotcha!

1.2 Normal
1.1 Red-tail
0.1 Albino corn

[SCWood]

Update: Updated setups!
Eden

Boots


1.2 Normal
1.1 Red-tail
0.1 Albino corn

[M.P.C]

Nice set ups, like that tiki guys in boots tank

[SCWood]

Nice set ups, like that tiki guys in boots tank

It's a tea light holder we never used ^^ went well with his cage

1.2 Normal
1.1 Red-tail
0.1 Albino corn

[SCWood]

So, I found a t-stat that has 3 inputs and I figured I'd go for it. Just wondering if it will come with 3 probes or if I need extras...?

1.2 Normal
1.1 Red-tail
0.1 Albino corn

[SCWood]

Nice set ups, like that tiki guys in boots tank

Tiki is Boots approved

1.2 Normal
1.1 Red-tail
0.1 Albino corn

[Jhill001]

That's so confusing 😧 even if they are all set to the same temps, you can't use different sizes? Because I have 2 smalls from 2 different brands and I planned on a medium and all 3 are for BPs so I figured they'd all be set to the same temp

1.2 Normal
1.1 Red-tail
0.1 Albino corn

Its also important to have each set up similar as well. The reason they all have to be the same heating source is because you'll only have one temp probe. So if one temp probe is in a tank with a tiny heater the others will heat too much in the other tanks.

Also so I mentioned having similar setups. You want to make sure you don't have one snake with super thick substrate and another with a really thin substrate or something blocking the heat because then the temps won't be the same across all the setups.

[SCWood]

Its also important to have each set up similar as well. The reason they all have to be the same heating source is because you'll only have one temp probe. So if one temp probe is in a tank with a tiny heater the others will heat too much in the other tanks.

Also so I mentioned having similar setups. You want to make sure you don't have one snake with super thick substrate and another with a really thin substrate or something blocking the heat because then the temps won't be the same across all the setups.

Gotcha we do far have decided that everyone gets a size small heat pad and whatever wattage bulb goes along well with their cage size. That way, nobody is lacking!

1.2 Normal
1.1 Red-tail
0.1 Albino corn

[Eric Alan]

So, I found a t-stat that has 3 inputs and I figured I'd go for it. Just wondering if it will come with 3 probes or if I need extras...?

Brand/model/picture?

[SCWood]

Brand/model/picture?

Zilla 1000 Watt Temperature Controller
http://www.lllreptile.com/products/1...ure-controller

1.2 Normal
1.1 Red-tail
0.1 Albino corn