THG vs flexwatt?

[Syfaio]

So at the moment I'm using thg and it seems okay so far expect for one of my connections sometimes it's even sometimes its close to 10° in difference even with a thermostat so Im probably gonna scrap that connection anyone had any problems with thg? Im getting a lot of mixed reviews on both ends flex watt and THG what are your opinions?

[PitOnTheProwl]

I solder everything so in short.... No

[Syfaio]

I solder everything so in short.... No

I solderr all mine aswel

[Eric Alan]

You said one of your connections of heat tape. How many connections do you have and how many connections per probe on the thermostat? How are they wired?

[Syfaio]

You said one of your connections of heat tape. How many connections do you have and how many connections per probe on the thermostat? How are they wired?

2 and they and one probe and they're only about 3.5ft and I solder thrm

[Syfaio]

You said one of your connections of heat tape. How many connections do you have and how many connections per probe on the thermostat? How are they wired?

It's a 2 level rack so each level has a connection both are 3.5ft and 6inch THG both directly plugged into the thermostat
(The probe is directly on the heattape itself)

[Eric Alan]

K. Just making sure each length of tape was the same length if connected that way. Would make a huge difference if not.

[Syfaio]

K. Just making sure each length of tape was the same length if connected that way. Would make a huge difference if not.

Yeah I tried it on a dimmer aswel seeing if it was still different and it was so I may have to re solder it or just toss it