» Site Navigation
1 members and 822 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,905
Threads: 249,102
Posts: 2,572,091
Top Poster: JLC (31,651)
|
-
Registered User
My first clutch!!!!
I am so happy. I went to check the snakes like i do every morning and I got a nice surprise, my pinstripe had laid eggs!!!. This is the first time I succeed in breeding pythons so I am new at this.
I suspected she was pregnant, but she did not look too fat. I could not feel the eggs inside. She laid 6 healthy eggs and an additional one that I am not sure about it.
I do not have any other female mature enough to get pregnant, so this is the only clutch I will get this season. I just have a "little giant professional farm-grade incubator" (for chicks). It is not tall enough to feet inside a plastic shoe box, so I put the vermiculite in the bottom of the incubator, and the eggs on top. Do you think this setup will work.
What kind of incubator do you recommend if you only have one clutch? How do you setup the eggs. I can't afford converting an old refrigerator into an incubator just for one clutch.
Thanks in advance for your advice.
Will try to post some pictures.
-
-
Registered User
-
-
Registered User
-
-
Registered User
-
-
Registered User
What temperature does that incubate the eggs at?
-
-
Registered User
I try to keep it at 90 degrees. It is at 93 right now.
-
-
Registered User
It's not ideal. As a temporary solution for this year it will work if you can get it to hold a stable temperature around 89 degrees and make sure the humidity is staying high enough, 93 is a bit too warm for my comfort. When you go to sleep and cant check it overnight you still want to be sure that the temps aren't getting too extreme.
A cheaper option to a fridge conversion would be a cooler(preferably igloo or something made of plastic) insert some heat tape and a small computer fan, hook the tape up to a thermostat (if you have a separate rack for the babies and only one clutch just buy a nice thermostat for them now an once they hatch move it from the incubator to the rack). The best advice I can give is to do the best you can right now. If the incubator you currently have is the current limit, try to make sure the temps and humidity are spot on and make your best go at it. If you can spare a little money and make an incubator you could use for this year and maybe a few in the future - then do that.
Best of luck to you with your clutch, the surprise of some new eggs is always exciting.
-
-
Registered User
Re: My first clutch!!!!
What humidity should I have in the incubator?
Sent from my iPad using Tapatalk
-
-
Re: My first clutch!!!!
 Originally Posted by Alex Roca
What humidity should I have in the incubator?
Sent from my iPad using Tapatalk
100%
The incubator temps will be more consistent run through a good thermostat.
Last edited by coldbloodaddict; 09-07-2014 at 11:30 PM.
-
-
Registered User
Re: My first clutch!!!!
Thank you very much for all your advice. I went ahead and bought a new thermostat for the incubator. I also started controlling the humidity and realized it was to low (85) and was not able to increase it no mater how much water I was adding. Therefore I decided to build my own incubator so I could place the eggs in a plastic shoebox and increase the humidity. (Please see pictures below). The max humidity I have been able to reach with the new setup is 95. Is that good enough?
What do you think about my home made incubator? with the new thermostat I had no problems keeping a stable 89-90 degree temperature.
Sent from my iPad using Tapatalk
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|