Starting with a rack set up?

[PitOnTheProwl]

5 tub rack

[Steezy B]

5 tub rack

This is exactly what I was thinking! I want to use the plastic shelfing from home depot (HDX 5-Shelf). My only concern is insulating it somehow since the sides and back will be exposed. Any suggestions?

[Snakes_on_a-Plane]

I have a couple side questions to rack or non-rack system. I am getting ready to build my own rack and I see most people use "heat tape". I've gone to every local pet store and hardware stores in town and no one has them. Ive looked online and I've found ppl that sell it by the foot and comes in 3, 4, 11, and 12 inches wide. What width do most ppl use on their racks? Do you run one stripe of heat tape throughout the entire rack, or start a new one for each row? This is the first time building a rack little alone I've never seen a home made on before. Are there any tips or tricks to make it more efficient and easy to build? Any idea are greatly appreciated! Thanks

[PitOnTheProwl]

My only concern is insulating it somehow since the sides and back will be exposed. Any suggestions?

On the "cheap" you can get a 4x8 sheet of blue board foam

I have a couple side questions to rack or non-rack system. I am getting ready to build my own rack and I see most people use "heat tape". I've gone to every local pet store and hardware stores in town and no one has them. Ive looked online and I've found ppl that sell it by the foot and comes in 3, 4, 11, and 12 inches wide.
http://www.reptilebasics.com/heat-tape

What width do most ppl use on their racks?
Depends on the size of the tubs in the rack

Do you run one stripe of heat tape throughout the entire rack, or start a new one for each row?
Depends on the design of the rack and your skill. I prefer to use a piece for each shelf incase one quits working I just have to remove the back of the rack and solder in a new piece.

This is the first time building a rack little alone I've never seen a home made on before. Are there any tips or tricks to make it more efficient and easy to build? Any idea are greatly appreciated! Thanks
Make sure you measure twice and then a third time to be sure before you cut.

[ZacharyPoller]

Get a rack or use tubs multiple tanks equal less snakes save room and money for more snakes !!!!! I got my first bp a few months ago now I have 4 bps 2 boas and 1 king. Me and my mom are starting a breeding company currently building racks and I got a full fridge for free so making an incubator. Next step is getting the 15 females we plan to start with and 7 males. We want to start small but we plan to build a successful business . its great because it's my biggest enjoyment being with snakes

Sent from my XT1030 using Tapatalk

[ZacharyPoller]

Was trying to edit hope it came out right


Sent from my XT1030 using Tapatalk

[whatsherface]

I have a couple side questions to rack or non-rack system. I am getting ready to build my own rack and I see most people use "heat tape". I've gone to every local pet store and hardware stores in town and no one has them. Ive looked online and I've found ppl that sell it by the foot and comes in 3, 4, 11, and 12 inches wide. What width do most ppl use on their racks? Do you run one stripe of heat tape throughout the entire rack, or start a new one for each row? This is the first time building a rack little alone I've never seen a home made on before. Are there any tips or tricks to make it more efficient and easy to build? Any idea are greatly appreciated! Thanks

For heat tape width, it depends on the size of the tub. Most people recommend between 1/4 to 1/2 the width of your tub. I use 6" for my hot spot and am ordering 12" to bump up the temps on the cool side, since my room's ambient temps are not very consistent (they dropped to 72 the other night and I just about had a heart attack). Some people run one big strip of tape through the whole rack, but I like having individual pieces in case of failures or problems with a single level of the rack. Check out the DIY and Caging forums, they're really helpful for building your own rack. There is a bit of a learning curve, but once you've started its a pretty rewarding process. I got super frustrated with mine because it was my first DIY type project ever, but looking back it was totally worth it. Like others have said: Measure twice, cut once. Double check everything! Best of luck to you!

[AllieKin]

If you use the Home Depot racks and if you are planning to glue board onto the bottom of the shelves, make sure you use brand name Liquid Nails, and be generous with the application of it. I used some sort of off-brand Liquid Nails and had the very unfortunate experience of the board coming unglued all over my rack system. It is a lot of work to disassemble the entire thing and re-glue all the boards, especially when it happens after the snakes have been living in there, so make sure to do it very carefully the first time!