» Site Navigation
0 members and 787 guests
No Members online
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,909
Threads: 249,113
Posts: 2,572,171
Top Poster: JLC (31,651)
|
-
Registered User
Re: Heater suggestions
 Originally Posted by LupineNight
Do you mean ambient temp in the room, or inside the rack? Are you using heat tape with the racks?
 Originally Posted by KING JAMES
I assume temp in the room...come to the dark side...heat a room dont bother with hotspots and what nots.
I use two of those knock off Mennonite ceramic heater fireplace things. One is on the floor another mounted on a shelf so it is close to the ceiling. Those two and a big fan at the other side of the room keep the temp pretty even floor to ceiling. 86 and no hotspots and somehow my snakes are doing just fine ;D
Yes i am using 3' heat tape, its a cb70 animal plastics rack. The hotspots inside the tubs are just fine, just the room stays on the cooler side so the ambient temps are in the lower 70s. If the ranco isn't necessary i have no problem just running a heater in the room. i just don't want to overheat my snakes if the heater malfunctions or any thing.. ya know
-
-
Re: Heater suggestions
 Originally Posted by Alay13
Yes i am using 3' heat tape, its a cb70 animal plastics rack. The hotspots inside the tubs are just fine, just the room stays on the cooler side so the ambient temps are in the lower 70s. If the ranco isn't necessary i have no problem just running a heater in the room. i just don't want to overheat my snakes if the heater malfunctions or any thing.. ya know 
Run a Ranco trust me! Very cheap insurance when the heater does malfunction. Just make sure you get a cheap heater, not a digital one. Must have either no t-stat, or an analog rheostat.
Sent from my Samsung Galaxy Note 3
Ball pythons:
-0.1 Normal (Lilith)
-1.0 Dark Normal
-0.1 Light Normal
-0.1 Pastel
-1.0 Lesser
Retics:
-0.1 Platinum
-1.1 Fire Tiger Het Albino
-1.0 Purple Sunfire
-1.0 Tiger
-0.1 Lavender Tiger
-1.0 Motley Het Purple
Boas:
-0.1 Hypo BCI
-1.0 Hypo BCI (Hades)
-1.0 EBV Red Group Hypo Pastel BCI (Ares)
-0.1 Normal BCI (Isis)
-0.1 Anery BCI (Medusa)
-0.1 Normal BCI (Hera)
-0.1 Normal BCI (Athena)
Blood Pythons:
-1.1 VPI Super Stripe Mead Line Borneo Ultra Breit
Epicrates Striatus Striatus
-1.1 Dominican Red Mountain Boa
Burmese Pythons:
-1.1 Albino Burmese
Anacondas:
-0.2 Yellow Anaconda
-1.0 Yellow Anaconda
-
The Following User Says Thank You to Expensive hobby For This Useful Post:
-
Registered User
Re: Heater suggestions
 Originally Posted by Expensive hobby
Run a Ranco trust me! Very cheap insurance when the heater does malfunction. Just make sure you get a cheap heater, not a digital one. Must have either no t-stat, or an analog rheostat.
Sent from my Samsung Galaxy Note 3
Thanks for the input! Will the Ranco not work with one that already has a t-stat or rheostat built in?
-
-
Re: Heater suggestions
 Originally Posted by Alay13
Thanks for the input! Will the Ranco not work with one that already has a t-stat or rheostat built in?
It won't work with higher end digital ones because the ranco works by turning the heater off. It would be the same as pulling the power plug. So the digital will reset everytime
Sent from my Samsung Galaxy Note 3
Ball pythons:
-0.1 Normal (Lilith)
-1.0 Dark Normal
-0.1 Light Normal
-0.1 Pastel
-1.0 Lesser
Retics:
-0.1 Platinum
-1.1 Fire Tiger Het Albino
-1.0 Purple Sunfire
-1.0 Tiger
-0.1 Lavender Tiger
-1.0 Motley Het Purple
Boas:
-0.1 Hypo BCI
-1.0 Hypo BCI (Hades)
-1.0 EBV Red Group Hypo Pastel BCI (Ares)
-0.1 Normal BCI (Isis)
-0.1 Anery BCI (Medusa)
-0.1 Normal BCI (Hera)
-0.1 Normal BCI (Athena)
Blood Pythons:
-1.1 VPI Super Stripe Mead Line Borneo Ultra Breit
Epicrates Striatus Striatus
-1.1 Dominican Red Mountain Boa
Burmese Pythons:
-1.1 Albino Burmese
Anacondas:
-0.2 Yellow Anaconda
-1.0 Yellow Anaconda
-
The Following User Says Thank You to Expensive hobby For This Useful Post:
-
Registered User
Re: Heater suggestions
 Originally Posted by Alay13
Thanks for the input! Will the Ranco not work with one that already has a t-stat or rheostat built in?
The issue with the ones with a built in tstat is when the ranco cycles off (it's an on off type thermostat, temp is reached, stat turns off, drops below a set temp, turns back on. You get the idea!!) when it cycles back on again the heater won't turn on, they have a safety feature where they won't turn back on after an outage! If they have a rheostat it's not an issue.
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to creatism For This Useful Post:
-
Registered User
Re: Heater suggestions
 Originally Posted by Expensive hobby
It won't work with higher end digital ones because the ranco works by turning the heater off. It would be the same as pulling the power plug. So the digital will reset everytime
Sent from my Samsung Galaxy Note 3
 Originally Posted by creatism
The issue with the ones with a built in tstat is when the ranco cycles off (it's an on off type thermostat, temp is reached, stat turns off, drops below a set temp, turns back on. You get the idea!!) when it cycles back on again the heater won't turn on, they have a safety feature where they won't turn back on after an outage! If they have a rheostat it's not an issue.
Sent from my iPhone using Tapatalk
Perfect i totally understand now, thanks all of you very much. I love this site
-
-
Registered User
Re: Heater suggestions
Sorry to kinda bump a thread but just making sure this is correct before I buy it.
Is this everything I need? I'd just have to wire it myself but the wires come with?
https://www.etcsupply.com/ranco-etc1...ller-p-86.html
this one is all set up already so I'd just plug my heater right in nothing else correct?
https://www.etcsupply.com/ranco-etc1...ired-p-87.html
Also Has anyone ordered from that site/ know they are legit? thanks for all the help guys!!
-
-
Re: Heater suggestions
Either will work. I got mine without the pre wired option for $43 off of Amazon from a HVAC supply store. Which ever you prefer but ya the etc 111000 is what you want.
Sent from my Samsung Galaxy Note 3
Ball pythons:
-0.1 Normal (Lilith)
-1.0 Dark Normal
-0.1 Light Normal
-0.1 Pastel
-1.0 Lesser
Retics:
-0.1 Platinum
-1.1 Fire Tiger Het Albino
-1.0 Purple Sunfire
-1.0 Tiger
-0.1 Lavender Tiger
-1.0 Motley Het Purple
Boas:
-0.1 Hypo BCI
-1.0 Hypo BCI (Hades)
-1.0 EBV Red Group Hypo Pastel BCI (Ares)
-0.1 Normal BCI (Isis)
-0.1 Anery BCI (Medusa)
-0.1 Normal BCI (Hera)
-0.1 Normal BCI (Athena)
Blood Pythons:
-1.1 VPI Super Stripe Mead Line Borneo Ultra Breit
Epicrates Striatus Striatus
-1.1 Dominican Red Mountain Boa
Burmese Pythons:
-1.1 Albino Burmese
Anacondas:
-0.2 Yellow Anaconda
-1.0 Yellow Anaconda
-
The Following User Says Thank You to Expensive hobby For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|