Quote Originally Posted by Havalian View Post
It's 3/8" PVC and was made by Jim who operates pvccages.com.
EDIT: it has an 80 watt RHP (maybe I should have gone with 40?) and a fluorescent light fixture mounted
along the front edge just above the doors.

I could do that. Should I put the holes near the top or near the bottom? Or just all over the side I want to be cooler at varying heights?
Also, does anyone have knowledge of the best way to put holes in PVC? I'm about to ask Google but thought it would be worthwhile to pose the question to people who may have done the same thing for the same reason also.
Are there any other vents in it already? If so where are they located. For my vision the vent was in the back so I added one in the top. Depending on where yours are at I would add it to the top on the cool side, or on the side of the cage towards the upper part. You can add vents in a few ways. One, decide where you want to vent at and drill some holes at a low speed, or what I did was cut out a rectangle with a razor blade, drilled some holes along the outside then put a piece of perforated metal screen over it and bolted it down.