Vote for BP.Net for the 2013 Forum of the Year! Click here for more info.

» Site Navigation

» Home
 > FAQ

» Online Users: 736

1 members and 735 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.

» Today's Birthdays

None

» Stats

Members: 75,909
Threads: 249,113
Posts: 2,572,174
Top Poster: JLC (31,651)
Welcome to our newest member, KoreyBuchanan
Results 1 to 9 of 9
  1. #1
    Registered User Antimatter's Avatar
    Join Date
    12-09-2012
    Location
    Providence, RI
    Posts
    38
    Thanks
    8
    Thanked 6 Times in 5 Posts
    Images: 12

    Above-tank heat emitter/light?

    So--do I need either one or what? Right now I'm using a uth pad in a plastic enclosure with just a little screen on top, which I keep covered for humidity since it gets dry here in the winter. Since there's not much mesh on my enclosure, the heat stays up in the 80s/90 on the hot side, but I've read/heard some things about having heat emitters anyway so that the top of the cage stays warm too---didn't make much sense to me because, well, heat rises right? Is there any benefit to an above tank heat lamp in addition to my pad?
    Also--lights--I feel like I"ve read a million caresheets and about 1/2 of them say I need a red lamp, the other half say it's really just for viewing and BPs are actually happier without it. The room I keep my snake in has a decent amount of natural light during the day. Unfortunately I can't post pictures right now because I lent my camera to someone, but there's a skylight not far from the enclosure and I live in a loft with low peaked ceilings, so the tank gets a bunch of light from it when the sun's up. Do you think that's enough or am I confusing the little guys circadian rhythms?

    Any thoughts?
    Last edited by Antimatter; 12-11-2012 at 06:01 PM.
    "The world is unkind to the shoeless and frolicsome" - J. Berry

  2. #2
    BPnet Senior Member I-KandyReptiles's Avatar
    Join Date
    04-26-2012
    Location
    Edmonton, Alberta
    Posts
    5,356
    Thanks
    726
    Thanked 2,321 Times in 1,479 Posts
    Is your UTH controlled with a thermostat?

    If your temps are fine without a CHE/lamp, you don't need one. They're more of a pain and will make your humidity harder to maintain.

    ---------
    0.1 Dog (Truffles)
    0.1 Naked Cat (Mercedes)
    1.0 Hamster (Pumpkin)
    1.1 Bumblebees (Satyana & Weedle)
    0.3 Normals (Shayla, Rita and Althea)
    0.1 100% Het Pied Ringer (Avalon)
    1.0 Pied (Monsieur Piederoff)
    1.0 Lesser 100% Het Albino poss het OG (Tinersons)
    0.1 Spider Albino (Ivy)
    0.1 Mojave Cinnamon (Morticia)
    1.1 Normal BCIs (Damon and Conga)
    0.1 Crested Gecko (Natasha)
    0.0.1 Rosehair Tarantula (Charlotte)
    0.0.1 P.Metallica
    0.0.1 A.Avicularia
    0.0.2 P.Irminia
    0.0.1 L.Parahybona
    0.0.1 N.Coloratovillosus
    ?.?.? ASFs

  3. #3
    Registered User Antimatter's Avatar
    Join Date
    12-09-2012
    Location
    Providence, RI
    Posts
    38
    Thanks
    8
    Thanked 6 Times in 5 Posts
    Images: 12
    I don't have a separate thermostat, but the heat pad I got has a dial on it to control the temp. There aren't any numbers on it but I've just been kind of fiddling around and figuring out where to put it to keep my thermometers in about the right places. Is a separate thermostat a better way to go?

    Thanks for the advice! I certainly am excited to not have to buy any more equipment!
    "The world is unkind to the shoeless and frolicsome" - J. Berry

  4. #4
    BPnet Senior Member ChrisS's Avatar
    Join Date
    11-05-2009
    Location
    NC
    Posts
    1,817
    Thanks
    363
    Thanked 546 Times in 403 Posts
    Quote Originally Posted by Antimatter View Post
    I don't have a separate thermostat, but the heat pad I got has a dial on it to control the temp. There aren't any numbers on it but I've just been kind of fiddling around and figuring out where to put it to keep my thermometers in about the right places. Is a separate thermostat a better way to go?

    Thanks for the advice! I certainly am excited to not have to buy any more equipment!
    I dimmer switch will work, but a t-stat is safer and more efficient. Dimmers have to be constantly adjusted due to the change in ambient temps. Whereas t-stats automatically adjust to their setting.

  5. #5
    Registered User Antimatter's Avatar
    Join Date
    12-09-2012
    Location
    Providence, RI
    Posts
    38
    Thanks
    8
    Thanked 6 Times in 5 Posts
    Images: 12
    Right on. Is there a particular type of thermostat you'd recommend? Maybe not too pricy but does the job?
    "The world is unkind to the shoeless and frolicsome" - J. Berry

  6. #6
    Registered User Old Sloppy's Avatar
    Join Date
    11-07-2010
    Location
    Atlanta, Georgia
    Posts
    74
    Thanks
    29
    Thanked 13 Times in 11 Posts
    I have 4 ut heaters and aluminum foil on the screen lid.

    My adult female is just fine.

    She weighs over 6 pounds at this time.

    I have 1 uth under my water dish plugged in 24/7 and the remaining 3 uth are on a thermostat.

    my thermostat is a "zoo med reptitemp 500R" it is a lower end unit but it does work just fine however.

    even with a thermostat I have to "turn it up" in winter and "turn it down" during summer.

    my BP's tank is upstairs that gets cold in the winter (some times 41 degrees) , don't worry it is nice and warm inside her tank....

    some times I wish I had a higher end unit, the perportional kind, but they cost over $110.......

    Harry
    Last edited by Old Sloppy; 12-11-2012 at 08:07 PM. Reason: added more information
    0.1 normal 3,200 grams 5 feet long
    100 gallon tank with 4 UTH
    3 are thermostat controlled, the 4th one is constantly powered located directly under the water dish.
    17" x 13" clear glass rectangular baking dish (5 quart) for her to soak in

  7. The Following User Says Thank You to Old Sloppy For This Useful Post:

    Antimatter (12-11-2012)

  8. #7
    Registered User Antimatter's Avatar
    Join Date
    12-09-2012
    Location
    Providence, RI
    Posts
    38
    Thanks
    8
    Thanked 6 Times in 5 Posts
    Images: 12

    Re: Above-tank heat emitter/light?

    Quote Originally Posted by Old Sloppy View Post
    my thermostat is a "zoo med reptitemp 500R" it is a lower end unit but it does work just fine however.

    even with a thermostat I have to "turn it up" in winter and "turn it down" during summer.

    my BP's tank is upstairs that gets cold in the winter (some times 41 degrees) , don't worry it is nice and warm inside her tank....

    some times I wish I had a higher end unit, the perportional kind, but they cost over $110.......

    Harry
    Just won an ebay auction for a new one of these, should be coming in the mail in the next few days! Thanks for the tip! I'll think about getting a better one next time I have some extraneous cash.
    "The world is unkind to the shoeless and frolicsome" - J. Berry

  9. #8
    BPnet Senior Member don15681's Avatar
    Join Date
    12-07-2009
    Location
    Saltsburg, Pa
    Posts
    1,410
    Thanks
    497
    Thanked 531 Times in 387 Posts
    Images: 108

    Re: Above-tank heat emitter/light?

    Quote Originally Posted by Antimatter View Post
    Right on. Is there a particular type of thermostat you'd recommend? Maybe not too pricy but does the job?
    don't go cheap on a thermostat. not only can it burn your snake but can also start a fire and burn your house down. I recommend the herpstat by spider robotics. they have different levels with different prices. spend the money, sleep better at night.

  10. #9
    BPnet Senior Member don15681's Avatar
    Join Date
    12-07-2009
    Location
    Saltsburg, Pa
    Posts
    1,410
    Thanks
    497
    Thanked 531 Times in 387 Posts
    Images: 108

    Re: Above-tank heat emitter/light?

    the zoo med 500 r is junk. I had one before and threw it away. I wouldn't even sell it to someone I dislike.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.1