» Site Navigation
3 members and 812 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,905
Threads: 249,101
Posts: 2,572,083
Top Poster: JLC (31,651)
|
-
On the inside top of the hide? I don't know where else it could be really it will be a pain to clean there but that is where it makes the most sense if it were on the face of the panel ambient temps would change the hide temp dramatically. I might be tempted to run a fail safe too attached to the panel (failsafe probe) and set to 100ºF or so so incase the panel got too much hotter it would shut down and not risk a burn.
-
-
Re: Thermostat question
 Originally Posted by kitedemon
On the inside top of the hide? I don't know where else it could be really it will be a pain to clean there but that is where it makes the most sense if it were on the face of the panel ambient temps would change the hide temp dramatically. I might be tempted to run a fail safe too attached to the panel (failsafe probe) and set to 100ºF or so so incase the panel got too much hotter it would shut down and not risk a burn.
I don't think he needs a second probe in this case. RHPs are pretty safe, and I've yet to hear of one going up in flames.
~Aaron
0.1 Pastel 100% Het Clown Ball Python (Hestia)
1.0 Coastal/Jungle Carpet Python (Shagrath)
0.1 Dumeril's Boa (Nergal)
0.1 Bearded Dragon (Gaius)
1.0 Siberian Husky (Picard)
0.1 German Shepherd/Lab Mix (Jadzia)
-
-
I just hate seeing temps of anything inside an enclosure of over 100º there is another post where someone is speaking of the RHP being over 120º. I would seriously be concerned by that kind of temp inside an enclosure.
-
-
Re: Thermostat question
 Originally Posted by kitedemon
I just hate seeing temps of anything inside an enclosure of over 100º there is another post where someone is speaking of the RHP being over 120º. I would seriously be concerned by that kind of temp inside an enclosure.
I would be as well. But I think that in general RHP are safe. I would put a thermometer probe on it, so I could see what the surface temperature is but I don't think a second thermostat is needed unless he sees that it is getting too hot.
~Aaron
0.1 Pastel 100% Het Clown Ball Python (Hestia)
1.0 Coastal/Jungle Carpet Python (Shagrath)
0.1 Dumeril's Boa (Nergal)
0.1 Bearded Dragon (Gaius)
1.0 Siberian Husky (Picard)
0.1 German Shepherd/Lab Mix (Jadzia)
-
-
Registered User
So I'm back to this topic. I'm very confused. My thermostat has a probe that's about 1" of the bedding under the RHP. When I use my temp gun it says it's 90. But thermostat is set for 85. That means the ambient temp is 85 & surface temp is 90? My cool side digital thermometer says 76. I just got a red tail boa. Just want to make sure I understand.
Kevin
-
-
Re: Thermostat question
It doesn't mean ambient is 85, it just means your thermo is set to 85. Your concern is that ACTUAL TEMP that the animal has access to.
Your temp gun gives you the actual temp of 90. Sounds great, sounds like you are right on target.
Your thermostat setting is RELATIVE to the actual cage temp produced, according to all of the variables of distance, substrate, cage material etc.
-
-
Registered User
Ok my friend had this custom setup which I purchased. He had the probe secured on the back wall 1" off the bedding. It's not directly under the RHP. But he has tons of snakes & said that's the best way. So my temp gun reads 90-94 right under the RHP but he says it's fine. Can you confirm this?
Kevin
-
-
Re: Thermostat question
 Originally Posted by NormalBallPythons
Ok my friend had this custom setup which I purchased. He had the probe secured on the back wall 1" off the bedding. It's not directly under the RHP. But he has tons of snakes & said that's the best way. So my temp gun reads 90-94 right under the RHP but he says it's fine. Can you confirm this?
Kevin
I would definatly put the probe under the RHP. If you want to keep it on the wall you will probably have to run the thermostat a few degrees under the temperature that you want.
~Aaron
0.1 Pastel 100% Het Clown Ball Python (Hestia)
1.0 Coastal/Jungle Carpet Python (Shagrath)
0.1 Dumeril's Boa (Nergal)
0.1 Bearded Dragon (Gaius)
1.0 Siberian Husky (Picard)
0.1 German Shepherd/Lab Mix (Jadzia)
-
-
Registered User
Ok well the thermostat is set for 85 & with my temp gun it says 90-94 when I scan around. Should I use digital thermometer instead of my gun?
Kevin
-
-
Re: Thermostat question
 Originally Posted by NormalBallPythons
Ok well the thermostat is set for 85 & with my temp gun it says 90-94 when I scan around. Should I use digital thermometer instead of my gun?
Kevin
Digital thermoneters and temp guns usually have the same amount of error (+/- 2 degrees) a digital thermometer has the advantage of always being there which makes it easier to moniter, but a temp gun will tell you the same thing.
~Aaron
0.1 Pastel 100% Het Clown Ball Python (Hestia)
1.0 Coastal/Jungle Carpet Python (Shagrath)
0.1 Dumeril's Boa (Nergal)
0.1 Bearded Dragon (Gaius)
1.0 Siberian Husky (Picard)
0.1 German Shepherd/Lab Mix (Jadzia)
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|