» Site Navigation
1 members and 658 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,912
Threads: 249,117
Posts: 2,572,191
Top Poster: JLC (31,651)
Welcome to our newest member, coda
|
-
Registered User
Re: Simple method to increase humidity... Please critique my resolve
 Originally Posted by DrDooLittle
I think bare minimum, (with out shed) should be 55 on humidity, imo.
I've had mine in the 40's for long stretches and been fine. In fact almost every care sheet ive read calls for between 40 and 60%. But if you can maintain a very humid micro-climate inside the hide then the outside humidity shouldn't have a huge impact on the shed as long as normal humidity is at a reasonable level.
-
-
I don't like seeing below 40% but I know an old timer snake (local school) that just has a humid hide and the humidity is rarely above 45% he is very healthy and has been there for well 18+ years anyway. I think too many freak about low humidity and restrict air flow and raise humidity building great homes for bacteria. There is often issues with RI that follow this method. Lots of air flow, snakes breath is not the way to increase humidity. Tanks vent poorly as it is.
-
-
BPnet Veteran
I use cypress mulch for all of my snakes and I love it. The only thing to remember is when you're feeding it's a good idea to hold the food item with tongs or your hand or something instead of just tossing it in there because it wouldn't be a good experience for you to have to pull a shard of wood out of your snakes bleeding mouth. been there done that. Other than that cypress mulch is very good for keeping humidity. Spray it down with a bottle so its slightly darker and when it lightens up in a few days spray again. Never had problems when using cypress.
edit: It's cheap too. Lowes/home depot sell 3 cu.ft bags for under 3.00 a bag. It's also very mildew resistant. Not sure why more people don't use it honestly.
Last edited by Twist; 01-26-2012 at 02:56 AM.
Current Pets
1.0 Ball Python - Twist
1.0 Ball Python - Houdini
0.1 brazilian Rainbow Boa - Hateful
1.0 Red Tail Boa - King
0.1 Tiger Reticulated Python - Pandora
0.1 Calico cat - Sweetie
-
-
Registered User
Re: Simple method to increase humidity... Please critique my resolve
 Originally Posted by Twist
I use cypress mulch for all of my snakes and I love it. The only thing to remember is when you're feeding it's a good idea to hold the food item with tongs or your hand or something instead of just tossing it in there because it wouldn't be a good experience for you to have to pull a shard of wood out of your snakes bleeding mouth. been there done that. Other than that cypress mulch is very good for keeping humidity. Spray it down with a bottle so its slightly darker and when it lightens up in a few days spray again. Never had problems when using cypress.
edit: It's cheap too. Lowes/home depot sell 3 cu.ft bags for under 3.00 a bag. It's also very mildew resistant. Not sure why more people don't use it honestly.
Another good way to avoid substrate ingestion is to use a separate container specifically for feeding. I have rept-carpet and I still do this simply to keep my snake from associating her tank opening with feeding time. It's kinda cool to watch actually how she will go from very docile and mellow to full on hunt mode as soon as I put her in the feed box.
Also, great suggestion on the tongs. My snake refuses to eat unless it's moving and it only took me getting bit once while wiggling the mouse with my fingers to realize that was a pretty stupid idea.
-
-
I have used a tupperware container with a wet paper towel shut in the lid and an entrance on the side. In fact thats the type of humid hide our new baby beardie has right now.
sent from my EVO
1.0 Spider "Charlie"
1.1 Normal "Precious" "Chumley"
0.1 Pastel "Sweet Dee"
1.1 Mojave "Stewie" "Little Bit"
0.1 Lesser "Sally"
1.0 Pied "Jack"
1.0 Nile Monitor "Superman"
0.1 Bearded Dragons "Snookie"
0.0.1 Sulcuta Tortoise "Kenny Powers"
1.0 Chocolate lab "Dante"
1.0 Now snake obsessed boyfriend
-
-
BPnet Veteran
Re: Simple method to increase humidity... Please critique my resolve
Your setup is probably different, but here is how I resolve the need to increase humidity during shed.
In my tubs, the humidity is about 55 - 60% when the water bowl is nearer the cool side of the tub. When shedding time comes, I move the bowl more towards (but not directly on top of) the heating. The humidity goes to 70%. Voila!
-
-
Re: Simple method to increase humidity... Please critique my resolve
 Originally Posted by kitedemon
I don't like seeing below 40% but I know an old timer snake (local school) that just has a humid hide and the humidity is rarely above 45% he is very healthy and has been there for well 18+ years anyway. I think too many freak about low humidity and restrict air flow and raise humidity building great homes for bacteria. There is often issues with RI that follow this method. Lots of air flow, snakes breath is not the way to increase humidity. Tanks vent poorly as it is.
Ding ding ding
Just make a humid hide. Tupperware with a lid on, moss or moist paper towel inside. I guarantee your snake is gonna find it and sit in there till they're good and ready to shed. They're dumb, but they're wired for survival. Snakes and reptiles have been managing their own sheds for millions of years. The only responsibility you have is to give them the option. They possess the ability to seek out a humid micro-climate when they need it.
-
-
I place a wet natural sea sponge in over the winter because it is really dry here.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|