» Site Navigation
2 members and 718 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,909
Threads: 249,108
Posts: 2,572,139
Top Poster: JLC (31,651)
|
-
Registered User
BP Setup issues?
okay I have two 10 gallon glass tanks setup for my BPs I use UTH for both plus I use the lights, I have three thermometers setup in both tanks and double hides I use aspen for sub and moss for in hide hum. I cant get my hum to stay high so i placed and extra water under the heat lamp over the uth. The thing is neither bp ever goes near the hot side of the cage. I thought maybe the cage was too hot an my temps where off but neither BP was restless or agitated. They both were just in chill mode in the cool side of the cage. They never leave the cool side and i guess this seems weird to me. They are also not in BALL mode over there either. Am I okay here or what am I doing wrong?
will also be building a rack this week to house my pending reptile show pickups in LA
-
-
BPnet Veteran
What are u controling your heat with? Maybe its too hot.
-
-
Registered User
I would ditch the lamp and put a towel over the top of the tank. This will help with the humidity but you will still have to spray the tank down at least once per day. Thats just the nature of the beast when using tanks. As far as them hanging in the cool side, it could be too hot on the warm side or they are just more comfortable over there. Make sure your temps are not to high on the warm side. Sounds like that might be a problem. A rack or tubs make a HUGE difference with the husbandry. Good luck!
1.0 Pastel
0.1 Bumblebee
1.0 Fire
0.1 Cinny
0.2 Normal
1.0 Mojave Het Hypo
-
The Following User Says Thank You to firemandan26 For This Useful Post:
-
Re: BP Setup issues?
You shouldn't "think" your temperatures are too high, you should "know" what your temperatures are on both sides of the tank.
What are you taking temps with and what do you control your heat sources with?
Do you have belly heat or is it overhead heat only?
Last edited by snakesRkewl; 01-03-2011 at 01:23 PM.
Jerry Robertson

-
-
Registered User
Re: BP Setup issues?
 Originally Posted by yeroc1982
What are u controling your heat with? Maybe its too hot.
I have thermometers I have one on the hot side and one on the cold side and a hum in the middle
-
-
Registered User
Re: BP Setup issues?
 Originally Posted by snakesRkewl
You shouldn't "think" your temperatures are too high, you should "know" what your temperatures are on both sides of the tank.
What are you taking temps with and what do you control your heat sources with?
Do you have belly heat or is it overhead heat only?
I use both uth and heat lamp I measure temps with thermometers one hot side other cold side hum in the middle
-
-
Registered User
Just for info
Guys thanks I didnt rush into this blind i spoke with pet stores on a constant basis and O read up on it. I used the setup that they recomended that is y I have it set the way I do. im sry if I dont have a more precise way to measure but I was told three thermos was good. Im looking to get a temp gun. I do love input tho
-
-
BPnet Veteran
 Originally Posted by Donald M
I have thermometers I have one on the hot side and one on the cold side and a hum in the middle
That's great if u have 3 thermometers, you could have 50 in there but that will not control your temps, it will tell you what the temp is but not control it. You need a good thermostat for your heat source so it dosent go too high or too low, a thermostat will do that for you. If you want a good one, get a Herpstat, set it to 90f and you wont have to worry about high or low temps.
1.0 Dumeril Boa (Mr. D)
1.0 Red Tail Boa (no name yet)
0.1 Ball Python (Pandora)
-
The Following User Says Thank You to yeroc1982 For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|