» Site Navigation
1 members and 599 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,909
Threads: 249,108
Posts: 2,572,136
Top Poster: JLC (31,651)
|
-
Re: New python owner, with question
yeah... ditch the lights and use a under the tank heater works day and night..... find a thermostat or rheostat to control the heater.... hopper mice is a bear minimum size wise for food... really sounds like you should have done some home work before bringing an animal home
-
-
Registered User
AkHerps
You are so correct I should have been more prepared. Hindsight is 20/20. But now I got Frankie Edgar and I will give 100% to make sure he is happy and healthy. He is in my office and it is about 75 degrees. I found a heating pad that is under one part of the tank. He has 3 hiding places. But he seems happy. He is exploring his new surrounding. So I guess he can't be that cold
Thanks for all the advice,
T
-
-
Re: New python owner, with question
 Originally Posted by tmaggieb
AkHerps
You are so correct I should have been more prepared. Hindsight is 20/20. But now I got Frankie Edgar and I will give 100% to make sure he is happy and healthy. He is in my office and it is about 75 degrees. I found a heating pad that is under one part of the tank. He has 3 hiding places. But he seems happy. He is exploring his new surrounding. So I guess he can't be that cold
Thanks for all the advice,
T
I'm not trying to burst you bubble or anything but the cruising and exploring is actually a sign of stress. It is also completely normal for a new snake to do a lot of cruising for the first couple weeks until they get used to the surrounds and realize nothing it going to come eat them. A lot of new owners mistake the constant cruising for their snake being happy, and that usually isn't the case.
A lot of people get their first snake as a sort of impulse buy and then realize all the mistakes they have made. The same thing happened to me too The nice thing about it is you learn from those mistakes and once you get everything figured out, it is smooth sailing.
-
-
-
-
The good thing is, you figured out what you need to change, and are going to take steps to do that.
It may seem like we kind of nit-pick and gang up a little sometimes, but we really mean well.
Take a deep breath, and make a careful list of all the stuff you'll need to pick up. There are ways to cut some of the costs if money is an issue, since I know a snake and supposedly complete setup from a pet shop wasn't cheap.
If you can, take the basking light back, your snake doesn't need it at all. Get a good under tank heat mat to replace it. A decent thermostat from a pet shop is a minimum of $50, but you can get by with a light dimmer for now for around $10. Get yourself an accurate digital thermometer, most of us like the Accurite digital weather station, which can be found with the indoor/outdoor thermometers at Wal-Mart. They are about $12.
You can by all means use your 20 gallon tank for now, just make sure your baby has several nice, snug hides, and maybe a fake plant or two. If you have a screen lid for the tank, you will have some trouble keeping humidity up, but there are ways around that, including partially covering the screen with foil or even plexiglass.
Since you just got your baby, it normal for it to cruise for a few days to even a week or so, then it should settle in nicely. Wait at least a week before trying to feed him or her. Once you get your setup all set, keeping your baby will be a breeze.
Best of wishes for you both.
Gale
1.0 Low-white Pied - Yakul | 1.0 Granite het Pied - Nago
1.0 Mojave - Okoto | 1.0 Vanilla - Kodama
1.0 Pastel - Koroku | 1.0 Fire - Osa
0.1 het Pied - Toki | 0.1 het Pied - Mauro
0.1 Mojave - Kina | 0.1 Blushback Cinnamon - Kuri
0.1 Fire - Mori | 0.1 Reduced Pinstripe - Sumi
0.1 Pastel - Yuki | 0.1 Dinker Normal - Akashi
0.1 Ghana Giant Normal - Tatari | 0.1 Dinker Normal - Kaiya
-
-
Registered User
I think you will need extra heat though since your room is only 75F. You may need a low wattage red night time bulb to keep the ambient temps up.
-
-
Registered User
Here's the sticky for tank setup, if you have not seen it. It says pretty much everything that everyone is saying in your thread but you can keep this for future reference. Congrats on the snake and good luck! http://ball-pythons.net/forums/showt...ass-tank-setup
1.0 Pastel
0.1 Bumblebee
1.0 Fire
0.1 Cinny
0.2 Normal
1.0 Mojave Het Hypo
-
-
Registered User
Frankie Edgars upgraded digs
After reading all of your responses and then spending over 2 hours surfing the other post I think I have Edgar's tank complete.
He now has 3 hides, I went out and bought an under tank heat mat, and a rheostat which is on medium, I put the day and night lamps are on timer control outlets and the tank has 2 thermostats. One just above the heat mat and one in the middle of the tank.
His tank humidity is between 50-55.
He also has a nifty new stand. I am so in love. Right now, being evening he has finally ventured out of his hide and roaming around.
I found out that Edgar is 4 moths old, and is 18 inches long, his head is the size of a dime and I will weigh him on Thursday when I feed him.
I have uploaded pictures in the members gallery. Go check it out and let me know if I got it right.
Tmaggieb
-
-
Re: Frankie Edgars upgraded digs
 Originally Posted by tmaggieb
I have uploaded pictures in the members gallery. Go check it out and let me know if I got it right.
Tmaggieb
Looking good. It just seems a bit too open for your wee one, so I'm thinking if you can cover 3 sides of the tank that would be cool. You can go from sweet-looking pricey ones to bare minimum el cheapo on these too.
Black construction paper would be very cheap. The background stuff for the fish tanks is also not so bad price-wise. You would tape them to the outside of the tank (just note that tape inside the tank is a no-no for a snake). This will prevent the snake from sensing movement 360 degrees around him. He only gets disturbance from the front side.
Also, if you can clutter up the space a bit, that would be great - like putting fake plants in there using suction cups or just wedging it into the screen top (no tape).
Here's my 10 gallon set-up for when my bp was a baby just to show you what I'm talking about:

That light looks like it is inside the tank. That's not the case. It's just a reflection of the light on the tank. My lights are set-up just like yours but it is set at dim and only on during the winter when my house temps are 72. My house temps are usually 78 except on winter, so I don't need it then. The heat lamps are a killer on the humidity. I have to put damp sphagnum moss in the tank to keep the humidity up when I'm using the lamp - and that's after putting the big water bowl on top of the under-tank heater, and covering the screentop with foil.
Congratulations on your new snake! Only one warning - ball pythons are addictive! I bought one snake and 3 months later I have 3 snakes!
----------------------------------
BP owner since Oct 2008, so yeah, I'm no expert.
0.1.0 pastel bp
1.0.0 spider bp
0.1.0 albino bp
1.0.0 bumblebee bp
1.0.0 yellowbelly bp
0.0.1 normal bp
1.0.0 normal western hognose
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, body thoroughly used up, totally worn out and screaming "WOO HOO what a ride!"
-
-
Registered User
Good warning! I just bought my second, and getting two more with a rack in the next two months! BE WARNED!
1.0 Pastel
0.1 Bumblebee
1.0 Fire
0.1 Cinny
0.2 Normal
1.0 Mojave Het Hypo
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|