Ok well a how to do is very very easy if you have a home depot near you since the melamine is precut into pre determined lengths and widths.Originally Posted by Superb Exotics
Looks Amazing! Now make a How to Do so I can make one just like it
-Superb Exotics
Product list
6 shelves @ 16" X 48" But they are actually 15 3/4" X 48" (9.98 each plus tax)
2 sides @ 15 3/4" X 28 3/4" (Just need to buy one side and have them cut it to the height of the sides desired in my case it was 28 3/4") (13.97 each but you only need one because one side piece comes in 96" length)
1 shelf @ 15 3/4" X 36" since you only need 5 dividers @ 4 5/8" you can use the shorter shelf home depot has in stock. ( I had home depot cut these for me since my saw can't cut that wide) (8.87 for the 15 3/4" X 36" shelf)
30 6qt sterilite tubs from walmart (94 cents each)
The backing you can use the peg board with holes in it or you can use the solid peg board with no holes or whatever you want really. The dimension for this piece should be 27 1/2" X 49".
1 box of 2" drywall coarse thread screws.
20 pcs of scrap wood or dowl rod. I had some scrap stuff from here I used as the tub stoppers since I wanted my tubs to stay as close to the front as I could.
1 1/2 Pizza Boxes ( LOL this is what I laid down on the shelf then put the tubs ontop of it then set the next shelf to be put in ontop of the tubs)
Tools
Table or Hand Router to route out sections in the dividers and each end of the shelf. (Only need this if your planning on using belly heat)
Drill
Measuring Tape
Sharpie Marker
Reply With Quote