enough

[ItsMichael805]

ok so my last post i was saying i was going to be making a rack, this is all the wood i have and i was wondering if i have enough wood to build a rack to hold 2 32q and 1 41q

i have 1 more of the one that the skateboard is on, and one more of the little sliver one,
the skateboard is size reffrence or how ever you spell that

[Patrick Long]

What Kind of wood is it?

How think is it?

[ItsMichael805]

its meliene, if thats how you spell it and its i think 1 inch thick

[Simpson Balls]

What Kind of wood is it?

How think is it?

Think is it Lol! You mean ThiCk! I don't think wood can think!

Daniel

[ItsMichael805]

its accully a couple cm less then a inch

[wilomn]

its accully a couple cm less then a inch

at 2.54 cm per inch you may be off on that measurement as well

My guess from looking is that it is either 15/32 which is almost 1/2 inch or closer to 3/4 of an inch, neither of which are important for figuring out your square footage.

If you can't do it by measurements take your tubs and lay them on the wood, outline them in pencil and then see what you have left.

There are several threads here that give you step by step instructions as well as cut lists. I would highly recommend you read those first.

[ItsMichael805]

oh i am ,isnt a cd space for each tub?

[RichsBallPythons]

well 32/28qt tubs are about 23x16.5x6. so you need to be able to have 2 shelves that are at least 17x24 and then the sides to accommodate it. if you can cut those sizes out then your good

For spacing i use the stick on felt pieces you use on cupboard doors to quite it form slamming shut I put one on each corner of the tub and works like a dream

[ItsMichael805]

can you take a picture of them if its not to much

[RichsBallPythons]

their cheap to buy depending on the kit you buy.