A no-no to use a powerstrip?

[mrshawt]

I don't know if this applies to any other thermostats, but the manual for the Repti temp 500r says not to plug it into a power strip. Why is this? It seems like a good power surge could fry the thing in the on position. I have light dimmers plugged into the tstat as backups for my UTHs, but I would prefer not to risk losing my thermostat.

Any input/experience would be appreciated.

[greenex]

heck, i didn't know that. i've had 2 of those plugged into the same power strip for a few years and haven't had any problems.

[mrshawt]

No one else?

[suzuki4life]

No one else?

because of the capacity of the 500r as claimed if you loaded it to capacity you would exceed the capacity of most power strip and COULD cause a fire.

[mrshawt]

So if I am only using two 8 watt UTHs, I'd be ok to use a powerstrip?

[Argentra]

The main thing with using power strips is to make sure you aren't exceeding the max wattage of the t-stat. Most stats are 500w, even the ReptiTemp, so they can handle up to that number (but of course, you don't want to get too close to it).
It's no danger to use a power strip when you're only running 6 8w pads. All of my t-stats have strips on them...even the ones that didn't come with them including both running ZooMed stats, and no problems at all in over a year.

[mrshawt]

What I mean is, the manual said not the plug the tstat into a power strip, then into the wall.

[Argentra]

AH...enlightenment.

No. You should never plug any thermostat into anything but the wall. Power strips and extension cords take power away from it, making it possible for the stat to malfunction. At least, that's what I've been told.

Of course, I was also told that it is permissible to plug the stat into an extension cord IF the cord is thicker (i.e. rated better) and therefore able to handle the power load.

[suzuki4life]

power strips and extension cords have more resistance...which turns into heat...which could lead to a fire...


the more things drawing power through that cord or strip...the more heat...the more chance you will have a fire.