Condensation In Eggs Tubs

[ama1997]

I asked this same thing a couple of months ago and you will not believe how simple the answer was.... Take your thermostat probe out of the egg box! just set it on the shelf of the incubator instead. This will make it so the outside of the egg box does not get colder then the inside. Bingo.

My probe just hangs down to the middle of the Incubator. My tubs are sealed with press and seal. I use the wireless thermometers. So I don't have any wires running through my tubs.

Mike hit it right on the nose. Condensation forms due to the difference in temperature inside the egg box and outside the eggbox. Get the temperature in the incubator where you want it and after a while the temperatures in the eggboxes will stabilize and match it. That's why it's recommended to have your incubator up running for at least a few weeks before you get eggs. It can sometimes take a day or two for the temperatures to all sync up and stabilize.

Ive had my Incubator and egg boxes set up for about a month or so now. So everything is stable I guess Ill have to do some tweaking. Its only the one egg box the top left one. The rest of them are normal. But that one has some big drops of water forming on the press and seal. I only check on them once a week. Make sure temps are good and not to much water. So Its not like im opening it 10 times a day. Anyways Ill have to see what I can do. Thanks