Hey man. Grats. Post a pic of the BP

Here are few tips: scrap the analog one and get a thermometer with a probe. Use that for the warmer side, and stick the digital dual-gauge one at the bottom of the cooler side.

Temps for warmer should be 90-94 while cooler should be 80-84. 79-85 is fine too lol.

Make sure your humidity is at least 50% and in the range of 50-60. If its over 60 that's fine too, let it go down a bit. I'd recommend using some other water dish because the BP is likely to knock it over. But one thing you can do is dig into the substrate and stick it in there, that way it's kinda like a hot tub lol

Oh and scrap that half-log hide. He will never use it. Or at least press one end to the glass and cover it with some post-its.

Finally, you should buy some foam board, cut and cover all sides except the front side. For the top cut out two small squares for the lamps. AND PUt something on it, like the mister because they will bend out from the heat. The foam boards will 1) Keep the moisture in, 2) Keep the heat balanced 3) provide more security for the snake.

All these tips are minor improvements but they will help the snake.

Good luck, and do post some more pics