Okay, I think i'm starting to understand. so I twist 2 ends of the wire together then solder it to the flexwatt? Can someone chim in on a couple more things i'm still wandering about?

1.) what cage wire to use?
2.) what kind of solder to use?
3.) do I split the power cord all the way down and attach it 2 each side of the flexwatt?

thanks for the replies!!!! also, I will have someone with a little more electrical experience help me out.

P.S. pictures would be awesome. close ups and details. thankyou

Quote Originally Posted by JoshJP7 View Post
Its pretty simple... I dont have any pics but can prolly take some for you sometime this week if you still need them... to make it simple...

Use a soldering wand to melt off the plastic on the metal strips on each side

tape the opposite ends up with electrical tape

cut just enough of the wire covering off to fit in the now plastic free metal strip

twist the wire ends and then smush em with the soldering wand and kind of spread em out a little bit

hold the soldering wand on the wire and rub whatever sodder you have on the wire until its covered... remove the wand ... let it harden and put some electrical tape on it.

Plug it into a thermostat and your good to go.