» Site Navigation
1 members and 679 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.
» Today's Birthdays
» Stats
Members: 75,905
Threads: 249,104
Posts: 2,572,100
Top Poster: JLC (31,651)
|
-
BPnet Veteran
Anyone know what surface temp will burn a BP?
I've just set it up... T-stat probe on UTH. T-mometer probe on the surface. (I realized a while ago that I must have put too much aspen in the tank/packed it down too much b/c to get a decnt hot side temp on the surface the UTH was upwards of :eek: 120degrees :eek: ). Now I can finally control that.
I've taken out a few handfuls of Aspen on that side to hopefully prevent it from sucking out the all of the heat form the UTH. Just for future references how hot can a heat pad get without burning a BP?
On a side note I didn't realize I could hook up a 2nd probe to the Herpstat, another addition to my argument w/ my girlfriend on why I can't have just onesnake .
-
-
BPnet Veteran
Re: Anyone know what surface temp will burn a BP?
the UTH should never get hotter then 100˚ in my book, and even that is pretty hot...
-
-
BPnet Veteran
Re: Anyone know what surface temp will burn a BP?
I've got the Tstat set to 95 right now and my surface temp is about 93.7 so I think removing the extra Aspen was the trick. I'm sure 95 wouldn't burn.
Strange Tstat, in the instruction book it says if the LED is Red it means this, if it's Yellow it means this, and if Green it means this. Unfortuanetly for me the thing is half Orange Half Green right now, O well.
Thanks for the feedback.
-
-
Registered User
Re: Anyone know what surface temp will burn a BP?
I believe 95 is the highest you should ever go.
-
-
BPnet Veteran
Re: Anyone know what surface temp will burn a BP?
T stat for the balls is set at 97 and the inside of their hides on the hot side stays at 95.4
~Jake~
Too many boas to list and a few balls as well
-
-
BPnet Veteran
Re: Anyone know what surface temp will burn a BP?
Pork Chops N' Corn Bread,
What substrate are you using/ how deep? I'm assuming your probe placements are the same as mine.
-
-
BPnet Veteran
Re: Anyone know what surface temp will burn a BP?
Aspen about 1/2" deep. The probe is on the Flex under the tubs.
~Jake~
Too many boas to list and a few balls as well
-
-
BPnet Veteran
-
-
Re: Anyone know what surface temp will burn a BP?
There's nothing wrong with 95 degrees, just don't go over that. Mine are kept at 95 on the hot side and 84 on the cool side, and they do just fine. Eat every week, thermoregulate normally. No complaints here.
--Becky--
?.? Normals, 1.0 100% Het Pied Classic Jungle, 1.0 Yellow Hypo, 0.1 100% Het Butterscotch Hypo, 0.1 100% Het VPI Hypo, 0.1 100% Het Yellow Hypo, 1.0 Enchi, 1.1 Yellowbellies, 0.1 YB Granite, 1.0 Black Pastel, 1.0 Lemon Pastel, 0.1 50% Possible Het Banded Albino, 0.1 Spider, 1.0 Fire, 0.2 Granite
-
-
BPnet Veteran
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|