Quote Originally Posted by Evan Jamison
Flexwatt draws so little current, don't be too worried about the wire gauge. I have used 18 gauge on all my connections with no problems.

One question though, are you planning on wiring all the above in one circuit? If so, you will have one heck of a time with temp. differences, as each size of flexwatt will heat up differently. You should really stick to one size for each circuit and one t-stat for each size.

Have fun, flexwatt is a herpers best friend!!

-Evan
Thanks Evan, I will have 3 different circuits(plugs). I know better than to try and run the 4" and 11" on the same plug . 4 strips of 4" on one plug,3 strips of 4" on another plug and 3 strips of the 11" on yet another plug.

I was worried about the amps. They tell you the watt per foot but not the amp. I already have a small rack that I'm quickly growing out of and I'm fininshing up a much bigger, 10 shelf rack. Just trying not to burn my. house down .

I am having fun, building racks is almost as rewarding as raising herps.

Thanks again