Quote Originally Posted by dr del
Some makes of heat mat are more directional than others and heat rises anyway so put the thermostat probe on top of the heat mat rather than underneath it.
I wish I could, but the UTH is adhered to the glass. It's outside underneath the tank of course.

Quote Originally Posted by dr del
Measure the temps at the hottest part the animal can reach first - directly on the inner surface of the viv over the heat source. Try and get this around 95 (ish) then vary the depth of substrate above it till the desired range (90-94) is on the surface of the substrate inside the hide.
How long are you giving the temperatures to adjust after resetting the thermostat?
Hmm...I'll give putting the probe on the glass first a try, that's a good idea. I readjusted the stat to 96 on Wednesday night and it's been cycling on and off since then without being touched.
Also, the humidity reading seems a bit odd as well, leading me to believe the problem might be with the meter. Tho the cypress is dry, the reading is at 68%. I'll try your suggestion first, though. I just hope I didn't have to do anything to set up the stat other than plug it in, plug in the mat, place the probe, and reset the set temp.