Quote Originally Posted by reediculous
you hit it on the head...................i had the probe set on the flexwatt....now it is in the tub, and it is a waitng process-----(when will i learn to read instructions).........i get so excited i just don't think....

thanks for alllll your help...........i'll keep you updated
In reading through this I would be careful. Just moving the probe off the flex and into the tube will NOT fix the fact that your flex watt is being run at a very high temp (110 is way too high). Yes the Helix is lower but if you use your heat gun on the flex watt my guess is it is still at 110+. you don't want the flex much higher than 95 all time (per the manufacturer). Be careful that you aren't giving yourself a false sense of security that you have fixed the problem.

What is the temp in the room where the rack is at? (as someone else pointed out) back heat is not very effecient so you lose a lot of heat to the air. If the room is too cool