Quote Originally Posted by heatherhead42
My first big question!
Until yesterday we weren't certain what size snake (i.e., hatchling, adult, or something in between) we were going to start with, so we didn't have all our materials together yet. So for heat, having read that it was an acceptable short-term solution, we were using a heating pad under the warm side of the cage. Now we want to replace it with a more permanent solution.
But the Repti-Therm UTH available at Pet Smart says it is for use with *glass* tanks ONLY. It specifically says NOT to use it with plastic.
So, what to use? We're also thinking we'll add a ceramic heating unit, as the ambient room temp is around 75 degrees in winter and we are having trouble keeping the tank warm enough.
But we still need belly heat... so can ya'll explain what you use to provide belly heat in a plastic tub? Thanks so much!! And, by the way, a quick answer would be MUCH appreciated--PetSmart closes in an hour and a half and we really want to have him warm warm warm tonight!
Thank you so much,
Heather
With any heating device regardless of the enclosure you need a thermostat to prevent the UTH from over-heating.

UTH you can use are Ultratherm or T-Rex Cobra Heat Mat the advantage they do not stick permanently to the enclosure like some others. (More convenient for cleaning)

Most people however use Flexwatt Heat tape that you wire yourself or can order pre-wired.

Now for the cool side it will depend on your ambient temp which can be tricky if it a low temps. Many people use a space heater in the room where they reptiles are kept. The other option is to have an additional heat source with a second thermostat set to achieve a temp of 80-84 on the cool side.