I'm having continued problems. I have some pictures though.

My T-Stat was showing 94 as the temp at the probes location.




And here is where I placed my probe.


And this is what the whole set up looks like.


Ok so heres my problem. My t-stat is saying the probe is at 94deg, but when I place my hand on the heat strip it barely feels warm to the touch. The only time I actually got temps in my tub that were accurate was when the probe was in the tub and under the hide, but obviously this won't work when a snake is in there so I'm lost. For the time being I only have the probe attached to the mid tub with a hide and an accurite. I'm trying to get the temps and humidity down pact in one tub and then trying to adjust for all three. Did I screw up the heat tape somehow by placing a cross with the aluminum tape across it? I'm totally lost guys, I have until the 25th to get this squared away for my new arrival. I know what you guys are thinking a CB70 is way to large for a small snake, but I have 4 hides for it and plenty of foliage so I hope it won't turn out to be a problem. If anything I'll just need a smaller tub. But I would definitely appreciate some help getting the initial set up right. Thanks Everyone!