Nice little setup you got there. However it's missing a few things. I'll just reinforce on top of what Judy already said.

Quote Originally Posted by Vianky
Ok Guys like I said this is my first BP and Im trying to do the best I can. I set up its new tank and what not today and here are some photos please tell me if everything is ok or what it does not need or what it does you know just give me your imput to see if I did it right. thanks guys!


The tank is too open all the way around. Get some Reflectix from the Depot or equivalent and cover the sides and back. The analog temp dial is prone to errors and will lead to husbandry malpractice. Get your self an Acurite digital therm/hygrometer from Wally world and you will be able to measure hot and cold end temps as well as gauge your humidity properly.

If the tank is setup in a high trafic area of the house it may lead to a stressed out snake. If it's such an area I would advice moving it to a more quiter place.

The lamp that you have is going to suck the moisture out of the air. If humidity is not up to par then you will have stuck sheds and many other issues. If the room is not that cold, I would advice using a second UTH under the tank with the other one. Purchace a couple of thermostats so you can control the heat out put: 82 to 84 on the cold end; 92 to 94 on the hot side. Use a CHE(ceramic heat emitter) along with the two UTHs if your room is too cold. Put a larger water bowl if using the CHE directly underneath it and play around with the system till you get a 50%-60% humidity and an 80 degree ambient temp. Also cover at least 2/3 of the top of the tank with contact paper so that you can retain humidity. Cut out a hole in the paper for the CHE(if using it).

This hide is way too big for the snake. A ball python needs tight places to hide in order to feel safe. Try using identical hides like Judy suggested on either ends of the tank. An insecure bp will not eat for you down the line and can lead to an overall unhealthy snake. Hope all of this was helpful and if you need more info refer to a sticky in this forum on how to setup glass tanks.