Thank you for your help and insight! I decided to go ahead and try that out. I have moved the RHP to the center of the enclosure and I have a heat pad on the hot side to warm up the surface temp under the hide. Temps are currently sitting around:

76 ambient temp hot side, 75 ambient temp cold side
90 surface temp hot side (on top and under hide), 80 surface temp cold side

So now I have the issue of why is my ambient temp so low. I'm thinking it's because the thermometers are on the back wall of the enclosure, near the vents (where the heat would be escaping), on the far left and far right (away from the RHP). I may try moving them to see if they are just in a bad spot, as the majority of the enclosure should be reading higher. It may just be because they are in either farthest corner.

That being said, with my ball pythons, I generally go by the rule of, as long as the ambient is around 80 and I have a surface hotspot of 90 then it is okay. What would be the steady ambient temp to go for, if I already have surface temps reaching the desired temps?