» Site Navigation
1 members and 2,132 guests
Most users ever online was 6,337, 01-24-2020 at 04:30 AM.
» Today's Birthdays
» Stats
Members: 75,394
Threads: 248,764
Posts: 2,570,183
Top Poster: JLC (31,651)
|
-
Heat Tape Installation Help
Please advise me how to protect the heat tape from rubbing against the tub. I don't have the tools or skill to recess it. I'm thinking I can put a piece of sheet metal on top of it. Any better ideas?
-
-
Do not put the metal on top of the heat tape! It will cause a fire. The metal will cause a short circuit and the tape could reach hundreds of degrees. Add something like linoleum tiles under the tubs so rather than moving the tape lower you're moving the tus higher.
Last edited by Erie_herps; 06-15-2021 at 07:33 PM.
-
The Following 2 Users Say Thank You to Erie_herps For This Useful Post:
Bogertophis (06-15-2021),Homebody (10-30-2021)
-
I'm not sure why you are worried about it rubbing on the tub, most of my racks have had the tubs rub on the heat tape and it's never been an issue. A few have had the heat tape on the back instead of the bottom of the tub. Do you mean the edges getting pushed up? I use aluminum tape to secure the heat tape to the rack, which conducts heat.
7.22 BP 1.4 corn 1.1 SD retic 0.1 hognose
-
The Following User Says Thank You to nikkubus For This Useful Post:
-
Re: Heat Tape Installation Help
No metal. Got it. Thanks.
-
-
Re: Heat Tape Installation Help
I just thought that the tub rubbing the tape would damage the tape over time. If you say it won't, then I won't worry about it. Thanks.
-
-
If you have the tape mounted on the bottom and the tubs are rubbing then it will damage it. However, if the tape is on the back and the tubs aren't rubbing it then it won't damage it. It would take many years of rubbing to cause damage but eventually they would need replaced and I've heard of the tape reaching dangerous levels because of this.
-
The Following User Says Thank You to Erie_herps For This Useful Post:
-
Re: Heat Tape Installation Help
Originally Posted by Erie_herps
If you have the tape mounted on the bottom and the tubs are rubbing then it will damage it. However, if the tape is on the back and the tubs aren't rubbing it then it won't damage it. It would take many years of rubbing to cause damage but eventually they would need replaced and I've heard of the tape reaching dangerous levels because of this.
Weird, I've never had that happen but I suppose it's possible after many, many years. Maybe some brands have thinner plastic coating? I want to say the oldest rack I've ever had is 15 years or so, normally the wood sagging is the first problem I have and I redo the whole thing.
7.22 BP 1.4 corn 1.1 SD retic 0.1 hognose
-
The Following 2 Users Say Thank You to nikkubus For This Useful Post:
Erie_herps (06-15-2021),Homebody (10-30-2021)
-
Re: Heat Tape Installation Help
Originally Posted by Erie_herps
If you have the tape mounted on the bottom and the tubs are rubbing then it will damage it. However, if the tape is on the back and the tubs aren't rubbing it then it won't damage it. It would take many years of rubbing to cause damage but eventually they would need replaced and I've heard of the tape reaching dangerous levels because of this.
My tub has a wide lip all the way around (cement mixing tub). I think it's too much of a gap. Besides, I've always used and prefer belly heat for my ball python.
-
-
Re: Heat Tape Installation Help
Originally Posted by Erie_herps
If you have the tape mounted on the bottom and the tubs are rubbing then it will damage it. However, if the tape is on the back and the tubs aren't rubbing it then it won't damage it. It would take many years of rubbing to cause damage but eventually they would need replaced and I've heard of the tape reaching dangerous levels because of this.
My tub has a wide lip all the way around (cement mixing tub). I think it's too much of a gap. Besides, I've always used and prefer belly heat for my ball python.
-
-
What size heat tape? We have a large DIY rack made from a plastic shelving unit, and covered the 11"x12" pieces of heat tape with pieces of 12"x12"x.08" acrylic sheet screwed into the rack. Kind of pricey but it worked, and we can easily disassemble and move the rack if needed since the heat tape isn't' actually attached to anything, the acrylic sheet holds it on the shelves.
Tubs are 54 qt under-bed style so they're pretty heavy and the rubbing tub would definitely damage the heat tape if it weren't protected.
Last edited by bcr229; 06-15-2021 at 09:05 PM.
-
The Following 3 Users Say Thank You to bcr229 For This Useful Post:
ballpythonluvr (06-18-2021),Homebody (10-30-2021),nikkubus (06-15-2021)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|