» Site Navigation
1 members and 2,194 guests
Most users ever online was 6,337, 01-24-2020 at 04:30 AM.
» Today's Birthdays
» Stats
Members: 75,395
Threads: 248,765
Posts: 2,570,188
Top Poster: JLC (31,651)
Welcome to our newest member, Boons
|
-
Registered User
The setup is finally ready!
After much help from you guys I think I’m ready for my first bp to arrive! This is my 20L. Both the UTH & CHE are on thermostats & temps are looking good. It was too late to sandwich the UTH thermo probe so it’s on the back of it (it goes probe, UTH, glass, substrate) According to the heat gun, the temps are accurate. Substrate is reptibark. I’ve got two hides & two thermometers. Being in the northeast the humidity is tricky but hits 50-60 when I run the humidifier. The wet towel trick also helps. I’ve back a background on 3 sides. Any other critiques? The little guy will be here Wednesday morning. I’m so excited!
Sent from my iPhone using Tapatalk
-
The Following 2 Users Say Thank You to mikemooch For This Useful Post:
Hannahvh (03-13-2019),Ronniex2 (03-12-2019)
-
Another thing that can help humidity and temperature is to add some insulation. I have foam insulation on three sides of my larger cage. It helps hold heat in so that heaters run less which keeps it from drying out as much. It's not something that usually HAS to be done but it can help a bit.
-
The Following 2 Users Say Thank You to SquirmyPug For This Useful Post:
Craiga 01453 (03-12-2019),Hannahvh (03-13-2019)
-
Registered User
Re: The setup is finally ready!
How did you set up the UTH and the thermostat probe? I didn't understand. You have the the thermostat probe inside the tank under the substrate? Then glass and the UTH under the tank? I'm having issues with controlling the heat under the warm side myself. I still can't get it to reach the desired 90° on that warm spot.
Sent from my SM-N950U using Tapatalk
-
-
Re: The setup is finally ready!
Originally Posted by Red357
How did you set up the UTH and the thermostat probe? I didn't understand. You have the the thermostat probe inside the tank under the substrate? Then glass and the UTH under the tank? I'm having issues with controlling the heat under the warm side myself. I still can't get it to reach the desired 90° on that warm spot.
Sent from my SM-N950U using Tapatalk
The thermostat probe should go between the UTH and the glass bottom NOT inside the tank. I believe I used foil tape to secure my probe.
1.0 Motley IMG BCI - (Venom)
1.0 Super Ghost BCI - (Phantom)
1.0 Boxer - (Knox)
-
The Following 3 Users Say Thank You to ckuhn003 For This Useful Post:
Hannahvh (03-13-2019),MissterDog (03-12-2019),Red357 (03-12-2019)
-
Registered User
Re: The setup is finally ready!
Originally Posted by Red357
How did you set up the UTH and the thermostat probe? I didn't understand. You have the the thermostat probe inside the tank under the substrate? Then glass and the UTH under the tank? I'm having issues with controlling the heat under the warm side myself. I still can't get it to reach the desired 90° on that warm spot.
Sent from my SM-N950U using Tapatalk
I have it taped to the back of the UTH.
Sent from my iPhone using Tapatalk
-
-
Registered User
Re: The setup is finally ready!
Originally Posted by mikemooch
I have it taped to the back of the UTH.
Sent from my iPhone using Tapatalk
I tried that when I got it at first and it didn't work. The foil tape kept falling off. So the thermostat probe was dangling. So I risked it and removed/peeled off the UTH to sandwich the thermostat prove between the glass and UTH mat. Yeah...I'm still not getting the 90° heat in the warm hide. The most I'm hitting is 85°.
Sent from my SM-N950U using Tapatalk
-
-
Peel the heat mat off and go to ace or Home Depot or order HVAC metal heat tape. It works awesome it’s nice and sticky and will hold and handles the heat
1.0 - Cinnamon Banana Ball Python (Thunder)
1.0 - Yellow Belly High White Pied Ball Python (Pretty Fly For A White Guy)
0.1 - Cinnamon GHI Ball Python (Leslie Snipes)
1.0 - Dumerils Boa (Sushi)
0.1 - Caye Caulker Boa (Lady Liberty)
0.0.? - Mandarin Rat Snake (Bumble)
1.0 - Mexican Black King (Rico Suave)
1.0 - Black Tail Cribo (Goldar)
0.1 - Jaguar Carpet Python (Cookie)
1.0 - Vietnamese Blue Beauty (Elsa)
1.0 - Green Tree Python (Banner)
0.2 - Yellow/Quince Monitors (Blanche & Dorothy)
-
-
Registered User
Re: The setup is finally ready!
Originally Posted by Phillydubs
Peel the heat mat off and go to ace or Home Depot or order HVAC metal heat tape. It works awesome it’s nice and sticky and will hold and handles the heat
Do you think I'm not getting that desired temperature because the mat isn't completely flat?
Sent from my SM-N950U using Tapatalk
-
-
Re: The setup is finally ready!
Originally Posted by Red357
Do you think I'm not getting that desired temperature because the mat isn't completely flat?
Sent from my SM-N950U using Tapatalk
It is def possible... I like to take the whole mat down. It could be because your probe isn’t in the right spot so it’s not reading correctly and heating correctly.
Sometimes you just have to play w the temps to get what you want. Depends on the therm
Sent from my iPhone using Tapatalk
1.0 - Cinnamon Banana Ball Python (Thunder)
1.0 - Yellow Belly High White Pied Ball Python (Pretty Fly For A White Guy)
0.1 - Cinnamon GHI Ball Python (Leslie Snipes)
1.0 - Dumerils Boa (Sushi)
0.1 - Caye Caulker Boa (Lady Liberty)
0.0.? - Mandarin Rat Snake (Bumble)
1.0 - Mexican Black King (Rico Suave)
1.0 - Black Tail Cribo (Goldar)
0.1 - Jaguar Carpet Python (Cookie)
1.0 - Vietnamese Blue Beauty (Elsa)
1.0 - Green Tree Python (Banner)
0.2 - Yellow/Quince Monitors (Blanche & Dorothy)
-
The Following User Says Thank You to Phillydubs For This Useful Post:
-
Re: The setup is finally ready!
Originally Posted by Red357
Do you think I'm not getting that desired temperature because the mat isn't completely flat?
Sent from my SM-N950U using Tapatalk
Can you plug the mat in without the Thermostat and take a reading to see how hot it gets? This is to just rule out the mat can produce the temps you need.
1.0 Motley IMG BCI - (Venom)
1.0 Super Ghost BCI - (Phantom)
1.0 Boxer - (Knox)
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|