» Site Navigation
1 members and 2,353 guests
Most users ever online was 54,199, 06-29-2026 at 02:43 AM.
» Today's Birthdays
» Stats
Members: 76,152
Threads: 249,289
Posts: 2,573,169
Top Poster: JLC (31,651)
|
-
You don't have to be a great "handyman" (or in my case, handy-woman) to make your own cage lids. If you can measure & give said measurements to the hardware store, they'll cut it for you too...I trust you can hammer a few nails? I now actually have a jig-saw but I didn't at first. You'll want 1"x 2" or 1" x 3" pine, 2 pieces about 1/8th" longer than the length of your tank (for ease), and 2 pieces that = (the length of the width of your cage + twice the width of the wood pieces* + 1/8th" for ease). *hint: 1" x 2" lumber is actuallysmaller than that...you're paying for the piece size before they milled it smooth for you. You don't want the rough stuff. So the wood pieces are actually about .75" thick, not an inch, and 2" is actually about 1.5" or so. So measure carefully before you
ask for cuts, plan it on paper & re-check on the cage itself. (as the saying goes, "measure twice, cut once")
Then you want something called "screen molding" (it's pine wood too). Once you make a rectangle out of the 1x2 (or 1x3) wood, you'll cut a piece of "hardware cloth" (aka welded wire, 1/4" holes) and staple it to the frame so that no rough wires poke out beyond the wood, and over that, you'll nail on the "screen molding". If you want to be fancy, the wood pieces can be stained and or just sealed (polyurethane or water-sealant) too, before you assemble the top. And, if you keep a snake that's prone to nose rubbing, you should use 2 layers of screening: one layer of hardware cloth (which tends to be rough, but is very sturdy), and a layer of vinyl window screen for the inside. (you'll need special shears to cut the hardware cloth too, they can show you at any hardware store, or they might do it for you if you can look a little but helpless, lol)
If the prospect of doing this yourself scares you off, you can hire a handyman to do it for you...but it's truly simple. I've lost count how many tank lids I've built over the years, & when you keep as many animals as I have, it's a money-saving skill worth having. But it's not 'rocket science'...
If you're still with me, I'll continue later to explain how to lock the tops on (other than just weighing them down, lol...which works but isn't ideal, too many ways to fail).
***What will you be putting a tank on? Wood furniture of some kind?***
Last edited by Bogertophis; 05-05-2018 at 10:45 PM.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|