» Site Navigation
4 members and 1,752 guests
Most users ever online was 6,337, 01-24-2020 at 04:30 AM.
» Today's Birthdays
» Stats
Members: 75,395
Threads: 248,765
Posts: 2,570,189
Top Poster: JLC (31,651)
Welcome to our newest member, Boons
|
-
Registered User
Re: Custom pvc/veranda terrarium I built
Thank you ! I appreciate it
-
-
Registered User
Re: Custom pvc/veranda terrarium I built
Just a rough idea of what the 40 gallon under tank heater with the plexi looks like so you understand more .
Sent from my iPhone using Tapatalk
-
-
The one thing I found that you can count on about Balls is that they are consistent about their inconsistentcy.
1.2 Coastal Carpet Pythons
Mack The Knife, 2013
Lizzy, 2010
Etta, 2013
1.1 Jungle Carpet Pythons
Esmarelda , 2014
Sundance, 2012
2.0 Common BI Boas, Punch, 2005; Butch, age?
0.1 Normal Ball Python, Elvira, 2001
0.1 Olive (Aussie) Python, Olivia, 2017
Please excuse the spelling in my posts. Auto-Correct is my worst enema.
-
The Following User Says Thank You to Reinz For This Useful Post:
Joelgriz8124 (03-18-2018)
-
Account Disabled
That's a bad a** build. Well done. Prefer the blue color over the usual black, just brings a bit more life to the whole unit, very impressive!
-
The Following User Says Thank You to Hamsnacks For This Useful Post:
Joelgriz8124 (03-18-2018)
-
Nice. Yeah I'm not sure about the flexwatt not being fully covered. I never had a problem with it but on the ones i have sandwiched between the cages, i only tape the 4 corners as the cages themselves more or less hold them down and i dont need to tape the outside of it as i want the heat the penetrate the lower cage top anyways.
0.1 Rio Bravo Pokigron Suriname BC-Gina
1.0 Meltzer/Lincoln Peruvian Longtail het anery BCL-Louie
0.1 Biak Green Tree Python-Pat
1.0 OSHY Biak Green Tree Python-Alex
0.0.1 Super Reduced Reticulated Gila Monster-Dozer
0.0.1 Utah Banded Gila Monster-Tank
0.0.1 Super Black Beaded Lizard-Reggie
-
The Following User Says Thank You to Sauzo For This Useful Post:
Joelgriz8124 (03-18-2018)
-
Registered User
Re: Custom pvc/veranda terrarium I built
Originally Posted by Hamsnacks
That's a bad a** build. Well done. Prefer the blue color over the usual black, just brings a bit more life to the whole unit, very impressive!
Thank you , I didn’t realize that my lighting made the tank look blue . The tank is actually all white but I can see why you got that mixed up . My gf just told me t looks blue as well. Kinda like that whole black and blue or white and gold dress thing that went down a few years back .
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to Joelgriz8124 For This Useful Post:
-
Registered User
Re: Custom pvc/veranda terrarium I built
Originally Posted by Sauzo
Nice. Yeah I'm not sure about the flexwatt not being fully covered. I never had a problem with it but on the ones i have sandwiched between the cages, i only tape the 4 corners as the cages themselves more or less hold them down and i dont need to tape the outside of it as i want the heat the penetrate the lower cage top anyways.
Do you think I should cover the whole flexwat in tape to keep it tighter to the cage ???
Sent from my iPhone using Tapatalk
-
-
Re: Custom pvc/veranda terrarium I built
Originally Posted by Joelgriz8124
Do you think I should cover the whole flexwat in tape to keep it tighter to the cage ???
Sent from my iPhone using Tapatalk
Super nice setup, kudos !!!
I have also read somewhere that aluminium tape can mess with the electricity? Not sure if that is true, though..
If you want the heat tape nicely against the cage as well as insulated (and not touching anything the cage may be leaning against) you can get a sheet of that super thin styrofoam (or other thin insulating material, push it against the heat tape and then tape it to the cages really well. Even when I have heat tape under a cage, I like to have the exposed side insulated, unless its a stacked unit.
If the cage sits on a stand, table or plywood, I put s sheet of styrofoam between the cage/heat tape and whatever it is sitting on. Making sure the styrofoam is taped against the cage and has a little cutout for cable and probe to sit in. It keeps the probe securely against the heat tape without bending the styrofoam.
Zina
0.1 Super Emperor Pinstripe Ball Python "Sunny" 0.1 Pastel Orange Dream Desert Ghost Ball Python "Luna" 0.1 Pastel Desert Ghost Ball Python "Arjanam" 0.1 Lemonblast Enchi Desert Ghost Ball Python "Aurora" 0.1 Pastel Enchi Desert Ghost Ball Python "Venus" 1.0 Pastel Butter Enchi Desert Ghost Ball Python "Sirius" 1.0 Crested Gecko ( Rhacodactylus ciliatus) "Smeagol"
"It is only with the heart that one can see rightly; what is essential is invisible to the eye." - Antoine de Saint-ExupÈry
-
The Following User Says Thank You to zina10 For This Useful Post:
Joelgriz8124 (03-18-2018)
-
Very clean build, great job.
Aluminum tape is fine so long as it is not on probe tips and exposed conduit or wiring. It is excellent to use to secure down the wire parts of probes as well as the edges of flexwatt. You can get away with 3 sides of the flexwatt because all you need is a loose fit that keeps it in contact with the pvc. Don't forget that any heat from the top of one cage is going to radiate up to the bottom of the one above so take that into account with temps.
One word of warning as someone here had a nightmare from it... That fake stump in the top cage is a potential trap for any snake. We have had several people actually get theirs stuck. I can't recommend enough to toss that ASAP and anything else with holes you can't fit you hand into.
This is what I am talking about. It has holes in the bottom they will get into
1.0 ♂ 2010 Spider BP 'Dante'
1.0 ♂ 2017 Bay of LA Rosy Boa 'Queso'
0.0.1 2017 Aru GTP 'Ganja'
1.0 ♂ Blue Tick Coonhound 'Blue'
1.0 ♂ 2018 Basset Hound 'Cooper'
-
-
Registered User
Re: Custom pvc/veranda terrarium I built
Originally Posted by SDA
Very clean build, great job.
Aluminum tape is fine so long as it is not on probe tips and exposed conduit or wiring. It is excellent to use to secure down the wire parts of probes as well as the edges of flexwatt. You can get away with 3 sides of the flexwatt because all you need is a loose fit that keeps it in contact with the pvc. Don't forget that any heat from the top of one cage is going to radiate up to the bottom of the one above so take that into account with temps.
One word of warning as someone here had a nightmare from it... That fake stump in the top cage is a potential trap for any snake. We have had several people actually get theirs stuck. I can't recommend enough to toss that ASAP and anything else with holes you can't fit you hand into.
This is what I am talking about. It has holes in the bottom they will get into
Just ordered new hides and gettin rid of it now thanks for the heads up !
Last edited by Joelgriz8124; 03-18-2018 at 01:26 PM.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|