Sounds like you did a lot of good research on your husbandry. If I may offer some small critiques that may help with the long term care from my own trial and error over the years:
Thermostats are inexpensive so I recommend getting one for each of your heat sources because as the weather changes and temperatures fluctuate, you may need to control the CHE independent of the control you have on the UTH. If you want to save up and get the best, a herpstat 2 allows you to control two heat sources independent of each other and actually allows dimming control which is ideal for the CHE.
You must must must secure down a thermostat probe. You snake WILL rip that thing out if not secured! I know mine tries his hardest to pull down the probe I have for the CHE and if I didn't have that anchored so well he would. He also tries his best to pull up the thermometer probes every night so if you have the thermostat probe in the tank it needs to be glued down or it will move and that is bad for temp control and why it is recommended to be outside the enclosure even in a glass tank.
The probe would of course be best if placed in a sandwich between the outside of the glass and the ultra therm so ultratherm > probe > glass and a piece of styrofoam between the bottom of the tank and the ultratherm so stand/table > styrofoam > ultratherm > probe > glass. Also, utlratherms can reach over 110 F so don't read the advertisement that it doesn't get hot, they get hot!
Now if you can't for some reason place the probe between the UTH and glass and have to place it inside you need to put it on the glass inside the tank then secure it with epoxy, silicone, or hot glue... never even use tape inside the tank!. You need the probe as close to the UTH as you can get to get the best and most accurate reading.
Just a tip for the repticarpet... get some velco (you can get this almost anywhere) and use the side (rough hook side) to secure down the carpet better. You can still pull the carpet up but this will keep it from shifting and prevent your snake from digging under the carpet. You secure down the velcro with hot glue or silicone. Velcro wont hurt your snake ever but it's a great way to keep that carpet down. Now the thing is you don't need carpet at all as that stuff will eventually get stained and messy but if you do want it that's fine. No need to velcro it down but I have done that in the past and it works great. Just never tape it (rule #1 is always no tape inside the tank)
Last suggestion is never to have a waterfall feature. The reason why is for several reasons: your snake will poop in it one day and cleaning that out will be near impossible. They get dirty even without snake poop and offer no benefit to humidity or quality of life and end up just being a waste of time and money.
Other than that looks like you have a great start to keeping your snake happy.
Reply With Quote