I bought some 1" PVC and some plastic closet rod hangers- the kind where one side is slotted so the rod drops in from above. I cut the PVC to length, and roughed it up with sandpaper. Then I mounted the closet rod hangers in the cage (after lots and lots of measuring) with a single through-bolt each, and a short screw to keep them from rotating.
I ran a single bolt through each of the non-slotted rod hangers and keyed the Perches to it using a hand drill. That way the perches can't spin. I capped the rough ends of the bolt/nuts with a yellow wire nut that I stuck on with hot glue. Hopefully that will alleviate the possibility of cuts/scrapes.
I can post some pictures, or just pm them if you want more info.
Originally Posted by MrBrightside
Reply With Quote