Snake racks...

[lunasjy]

Can anyone give me a detailed way to build my own snake racks?

I have tried before but the bottom ended up too tight and the top ended up too loose. I would like it to be able house at least 10 ball pythons . I would also like to build a hatchling rack that can hold roughly 20 or so babies. Can some send me a detailed link or give a detailed step by step of what I need and I need to do.

Thanks

[Montypython696]

I would suggest taking a look at the DIY section of the forums.

More specifically this thread: http://ball-pythons.net/forums/showt...-Rack-Complete

I found this one more than helpful when it came time to build my racks. The bottom shelf for my 32 quart rack is too tight to comfortably fit any snakes in, so I opted to use it as storage instead. The tubs in there have paper towels and garbage bags in them.




This picture was taken almost a year ago, and the racks are now filled to the point where I'll be building another two courtesy of my income tax check.

I used the topic I linked for you as reference, but I ended up drawing them out on paper first so I can customize them for my needs.

I'll try to post you some newer pics of the racks, especially when I start building the new ones which would be another big one for females, and a 8 shelf one for babies.

Hope this helps.

[lunasjy]

I didn't even see a DIY section on this forum. Thanks, I will take a look.

[SlitherinSisters]

Here's a thread I put up on how to build a breeder rack
http://ball-pythons.net/forums/showt...33#post2043233