Vote for BP.Net for the 2013 Forum of the Year! Click here for more info.

» Site Navigation

» Home
 > FAQ

» Online Users: 1,199

1 members and 1,198 guests
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.

» Today's Birthdays

None

» Stats

Members: 75,934
Threads: 249,128
Posts: 2,572,274
Top Poster: JLC (31,651)
Welcome to our newest member, LavadaCanc
Results 1 to 5 of 5
  1. #1
    Registered User
    Join Date
    08-07-2014
    Posts
    24
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Images: 2

    Help with Humidity and temp

    Hi I just got my BP and I'm struggling with the humidity and temp. I have a heat lamp and UTH hooked to a thermostat which seems to be working. However, the hot side seems to stagnate at 83 degrees (i know thats not too low) but the cool side stagnates at about 78 degrees. Is that too off balance. I wanted to get 87 and 75 but am I just being too particular and worrisome? My tank is a 36x18x17.

    Now, I'm also really struggling with humidity. It's stagnating at about 43-45%. I'll mist by hand, which instantly bumps it up the 80's, and within an hour drops back down. I was told to try plexiglass, however, if I do that, my cool side temp will raise, and I don't need that. I'm thinking of the wet towel method? Would that work?

    Thanks all

  2. #2
    BPnet Veteran ajmreptiles's Avatar
    Join Date
    07-17-2014
    Location
    Newark, DE
    Posts
    387
    Thanks
    64
    Thanked 152 Times in 118 Posts
    A few questions, what is the wattage of the bulb for you lamp, and what kind of substrate are you using? when I was using a terrarium I used the damp towel method and it worked out fine for me. I was able to keep a 50-60% humidity level. a decent sized water dish will also help . I had the hot side of the tank at 90-92 and the cool side was around 79-82. With the towel you will have to wet it at least once a day and I recommend changing out the towel every other day so it doesn't get stagnant.


  3. #3
    Registered User
    Join Date
    08-07-2014
    Posts
    24
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Images: 2

    Re: Help with Humidity and temp

    My bulb is a red infrared one, so he can't see it at night. Its a 75 watt, which was suggested to me by someone who's owned her own BP for 9 years. I have moss on the cool side, and aspen mulch on the hot side. I put a towel on about 5 minutes after posting, and it raised the humidity to 62% which is good. Also, my snake is starting to shed, so I figured 60's is decent. However, now that the towel is on, the temp has raised to 79.2 on the cool side. Hot side is still just under 85. I'm just really struggling with balancing out the temp versus humidity.

  4. #4
    BPnet Veteran ajmreptiles's Avatar
    Join Date
    07-17-2014
    Location
    Newark, DE
    Posts
    387
    Thanks
    64
    Thanked 152 Times in 118 Posts
    the cool side temp is fine, the low temp on the hot side could also be affected buy the ambient temperature of the room you are keep the tank in, but you have a decent gradient which is important also what temp is the thermostat set to? If you could post a picture of the tank and setup that could also help as others with far more experience than I do might chime in with their advice as well
    Last edited by ajmreptiles; 08-25-2014 at 12:53 PM.


  5. #5
    Registered User
    Join Date
    08-07-2014
    Posts
    24
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Images: 2

    Re: Help with Humidity and temp

    My thermostat is set to 90. But it usually doesn't get above 88 anyway. My gradient temp in the room right now is probably around the 70's. I live in WA state and don;t have air conditioner ( most ppl here don't) cause it doesn't get more than 85 hardly ever. So right now, my room is just controlled by outside temp. And it usually seems to be 70's in here.



    I can't figure out how to post a picture. It keeps saying to use a URL. I don't have any snake pictures from a URL
    Last edited by Echristoe827; 08-25-2014 at 01:24 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.1