Vote for BP.Net for the 2013 Forum of the Year! Click here for more info.

» Site Navigation

» Home
 > FAQ

» Online Users: 861

0 members and 861 guests
No Members online
Most users ever online was 47,180, 07-16-2025 at 05:30 PM.

» Today's Birthdays

None

» Stats

Members: 75,905
Threads: 249,104
Posts: 2,572,100
Top Poster: JLC (31,651)
Welcome to our newest member, Pattyhud
Results 1 to 1 of 1

Threaded View

  1. #1
    Registered User
    Join Date
    03-17-2014
    Posts
    8
    Thanks
    2
    Thanked 2 Times in 2 Posts

    Another heating/temperature question

    A few weeks ago, a few members helped me adjust my setup but I now have a couple of additional questions. Currently my temperature at the bottom of glass tank is 90 on the warm side and 80 degrees on the cool side. The thermometer probes are located directly in the center of each area. When I place my identical hides on the center of each area, the temperatures increase about 3 degrees in each hide. I know this because the probes are under each hide. So my thermometers are reading 93 and 83. If the snake sits in either hide, the temperature reading goes up another 2 degrees. Should my floor temps be based on floor temperature, empty hide or occupied hide? Also, currently my ambient temperature gets a high of 85 or a low of 78 depending on my room temperature which varies between 64 and 68. My day and night lamps have dimmer switches so I always seem to be adjusting the ambient temps to about 82. If ambient reach 85, is that too hot? Is 78 too low? Or should I just try to maintain an even 82?

    Here is my setup again:
    Enclosure = 36x12x12 glass tank with screen top
    Plexiglass cover with hole cut out for heat lamp and fogged hose
    Heat lamp= (located in center of screen top)= Zoo Med mini combo deep dome fixture with 100 watt daylight blue & 100 watt night time red (lights are on alternating 12 hr. timers
    (2) adjustable dimmer switches for heat lamps
    (2) under tank heaters = One located at each end. Each connected to a Hydrofarm digital thermostat. Thermostat probe is located under tank, directly on heat pads (between glass and UTH).
    (2) digital thermometers/humidity gauge with probes = One located on each end. Probe is inside tank, located on center of UTHs
    Water bowl = (1) located under heat lamp
    Substrate = Kritter's Crumble all natural coconut husk fiber, fine (1/2" deep above UTHs, sloping to about 1" deep at bank of tank/2" deep at center of tank)
    Sphagnum moss = Located around side and back edges of tank
    Hides = (2 identical reptile basics small hides. One at warm side, one at cool side)
    Multiple plastic plants for hiding underneath and a large repti-vine for climbing.
    Back and sides of tanks are covered with rain forest design tropical backgrounds for privacy.
    Spray bottle for misting of moss every other day
    Reptifogger runs twice a day once in morning and at night
    Temperature gun

    Temperatures:
    ambient temperature = 82 degrees
    Actual temperature of glass above UTH on warm side = 90 degrees
    Actual temperature of glass above UTH on cool side = 80 degrees
    Humidity = 60%

    Thanks
    MARK
    Last edited by Mark Z; 04-28-2014 at 09:24 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.2.1