Quote Originally Posted by SnowShredder View Post
I've been having a couple small problems with mine that I thought I would post on here since this thread is the same type of rack.

So this was my set up, a 4 tub 41 qt rack, and an 8 tub 28 qt rack, with 2 boaphiles on top.
I noticed that the boaphiles were much too heavy (about 45lbs combined), because the shelves settled and made opening the tubs very hard. So I took them off, and rescrewed each shelf.
I've noticed that even without the boaphiles, the shelves are settling again.

Any of you have this problem? I think I may have cut the posts too short because I can't screw through the post AND the shelf. I've been placing the screws underneath the shelf, only into the posts, with the shelf sitting atop the screw. I'm assuming that's my problem. I have several leftover post pieces that are longer and will see if replacing them with those will help

I'm not having that problem at all, and I'm not even using screws in the posts. I made my posts long enough there is no way for the shelves to move down. I'm thinking your posts might be to long.

Sent from my SCH-R530U using Tapatalk 2