The white bulb is fine. However, you need to keep a hot spot 24 hours a day so your snake can thurmoregulate properly. Home Depot (I'm sure Lowes has something similar) has a "table top lamp dimmer" that you can plug your lamp into and that plugs into the wall. It's got a little control that will control how much power goes to your lamp. Feel free to use the red 75watt bulb with this because you can lower the amount of power until it gets to the 90* hot spot. I use this method for a corn snake and it works well. You just need to make sure you check it frequently (two or three times a day) to make sure the temps are right. It will fluctuate with your ambient temperatures.
When you aren't strapped for cash, think about getting an under the tank heater with a thermostat. Ball pythons digest better with an under the tank heater for belly heat but they will be fine with a lamp.
As for feeding, it sounds like your ball python is skinny. Don't jump to feeding it too quickly because it can do more harm than good. I got a very, very small ball python (She was 44g at six months old - that's smaller than a newborn fresh out of the egg) and I started her out feeding her small meals and working towards larger meals more frequently. I would start by feeding her a hopper mouse or rat pinky once a week for a few weeks then gradually feed something larger. Don't rush.
I don't know if you've seen this: http://ball-pythons.net/forums/showt...s%29-Caresheet but take a look. It's got a lot of valuable info.
One other thing to mention, with a heat lamp, you'll have trouble with humidity. Try keeping a damp towel over the screen top to hold humidity. If you have any questions, feel free to ask!












Reply With Quote