I can't speak for Aaron but i can tell you how I clean all my enclosures.

Remove all the furniture and start it to soak in hot soapy (f10scDX) water.
I use a shop vac and remove all the substrate.
Spray the interior with F10scXD detergent and scrub with a long bristle brush.
Rinse, rinse , and a third time.
I then spray F10sc on the interior.
While waiting I scrub the furniture I left in the hat water and rinse it.
Spray it with F10sc.
Re apply to the interior more F10sc (saturate means saturate and it runs off the sides and top)
The exterior I use a sponge with f10scXD and wash the top, VENTS especially back and sides. i do not do the bottom as there are no vents and electrical connections I do however check them every month and once a year remove test and clean under them and then return.
Dry everything (after it has sat for at least 10 min.)
return everything clean and disinfected.

- - - Updated - - -

This is how I do everything the rack I own excluded, I have to remove the heat from it every month in order to do a cleaning. It is a huge job and takes all bloody day.