I'm a new BP owner. I had a Cal King years ago but the equipment and technology have changed alot since then. I'm alittle confused about using the IR temp gun. I thought my temps were good until I got the gun. My probe is mounted near center just a bit on the warm side about an inch off the substrate. Once I used the gun I found that with the air temp in the suggested range the ground temp was to hot. I raised the heater stands and now that I have the ground temps in the ideal range on both sides the air temp is registering in the high 70's at night and low 80's at day. Is that air temp fine as long as the ground is good?
40 gal tank with ceramic heater on warm side with a ZooMed double deep fixture near center a bit on the cool side. I keep my rooms cold so I added this with a 60 watt day bulb and a 50 watt night bulb on a timer to give it a small temp drop at night and add just a bit of heat. Also has a UTH. No thermostat yet but its in the works.
Snake background: I just got him from a family that son lost interest in it. It was a Christmas present in 2011, so its still pretty young. just after I got him I fed it and a few days later it started the shed cycle so it has not been to active for me to be able to tell if the temps are good. It has just been going between the hides evenly.