Moving day!!! **Pic Heavy**

[jasbus]

this is how close my tubs are on the frames...

[Steven Raymer]

I am working on fixing the tub spacing but here is some pics of the watering system. and some cute pics i took.
(its on the aquarium for pressure)








Now some cute pics






As always all comments and advice is welcome. right now i am looking at putting a strip of plywood to fix the spacing issue

[JohnNJ]

As always all comments and advice is welcome. right now i am looking at putting a strip of plywood to fix the spacing issue

Why don't you just move the bottom rail up on each tub?

I can't see that well in the photo but do you have the water line feeding in to the tub, below the screen? They will chew through that for sure.

[Steven Raymer]

Why don't you just move the bottom rail up on each tub?

I can't see that well in the photo but do you have the water line feeding in to the tub, below the screen? They will chew through that for sure.

Duh!!! wow i was making that out to be a lot harder lol

and yes i have the line in the tub a little thats how the claps go..... will this be a problem

[JohnNJ]

Maybe I have it wrong but my clips are on top of the screen. The way you have it, it's possible for them to chew the line and you can't easily remove the valve. You will have to disconnect the valve from the water line which could be messy.

[WtGreg]

Maybe I have it wrong but my clips are on top of the screen. The way you have it, it's possible for them to chew the line and you can't easily remove the valve. You will have to disconnect the valve from the water line which could be messy.

I have the same clips, but I do them in reverse of the pictures as well, so they clip to the outside, thus keeping the line from being exposed and allowing a really easy removal from above rather than having to reach around and up in the tub.

[Steven Raymer]

I have the same clips, but I do them in reverse of the pictures as well, so they clip to the outside, thus keeping the line from being exposed and allowing a really easy removal from above rather than having to reach around and up in the tub.

Better???








Thanks for all your guys help!!! after this one is done the next one should be pretty easy..... i hope

[SlitherinSisters]

Better???








Thanks for all your guys help!!! after this one is done the next one should be pretty easy..... i hope

There you go!

[mp27006]

As to the gap on your tubs you need to snug them up. If a rat can get their teeth on the top lip of the tub they WILL chew out. When I build mine I basically turn the rack upside down and lay the tub on the hardware cloth and then attach the rails. It is tight to start with but with time they will loosen up.

[jasbus]

You don't need the aquarium up there. The bucket sitting on a couple of 2x4's on the top is high enough for your water pressure.